弹道与气动力技术

掠飞末敏弹膛内运动过程仿真研究

  • 刘高 ,
  • 檀艳朝 ,
  • 刘荣忠 ,
  • 郭锐 ,
  • 袁军 ,
  • 赵博博
展开
  • 1 南京理工大学机械工程学院, 南京 210094
    2 国营5103厂, 河南南阳 473000

刘高(1986-),男,河北冀州人,硕士研究生,研究方向:弹药灵巧化。

收稿日期: 2014-05-30

  网络出版日期: 2025-05-26

基金资助

国家自然科学基金(11372136)

Simulation Study of Motion Process in Bore of SFAR TSP

  • LIU Gao ,
  • TAN Yanchao ,
  • LIU Rongzhong ,
  • GUO Rui ,
  • YUAN Jun ,
  • ZHAO Bobo
Expand
  • 1 School of Mechanical Engineering, Nanjing University of Science and Technology, Nanjing 210094, China
    2 No. 5103 Factory, Henan Nanyang 473000, China

Received date: 2014-05-30

  Online published: 2025-05-26

摘要

基于Adams软件对掠飞末敏弹的膛内运动过程进行了动力学仿真分析。考虑掠飞末敏弹的结构非对称性,重点分析了质心位置、转动惯量等结构因素对掠飞末敏弹膛内运动正确性的影响。仿真结果分析表明:弹丸结构非对称时,弹丸与炮膛间接触次数和受力大小均明显增大;弹丸质心位置改变造成接触力增大,初始摆动角增大;转动惯量改变时,初始摆动角增大。

本文引用格式

刘高 , 檀艳朝 , 刘荣忠 , 郭锐 , 袁军 , 赵博博 . 掠飞末敏弹膛内运动过程仿真研究[J]. 弹箭与制导学报, 2015 , 35(3) : 125 -129 . DOI: 10.15892/j.cnki.djzdxb.2015.03.032

Abstract

Dynamics simulation analysis on movement process of swept flight assault roof (SFAR) terminal-sensitive projectile (TSP) in bore was made by Adams software. Considering structural asymmetry of SFAR TSP, analyzed the influence of structural factors including centroid location, moment of inertia, etc on the motion process of SFAR TSP in bore. Simulation results show that: when the structure of projectile is asymmetric, the number and force size of contact between bullet and bore increase significantly. Changing the projectile centroid position causes increase of the contact force and the initial swing angle. When the moment of inertia changes, initial swing angle increases, too.

参考文献

[1]
芮筱亭, 刘怡昕, 于海龙. 坦克自行火炮发射动力学[M]. 北京: 科学出版社, 2011.
[2]
芮筱亭, 杨启仁. 弹丸发射过程理论[M]. 南京: 东南大学出版社, 1992.
[3]
岳永丰, 吴群彪, 沈培辉. 弹丸结构参数对膛内运动的影响分析[J]. 兵工自动化, 2013, 32(3):35-38.
[4]
岳永丰, 沈培辉. 恢复系数对弹丸膛内运动参数的影响[J]. 弹箭与制导学报, 2013, 32(6):77-80.
[5]
刘佳, 郭保全. 弹丸膛内运动姿态动力学仿真[J]. 四川兵工学报, 2011, 32(9):15-18.
[6]
王儒策, 刘荣忠, 苏玳. 灵巧弹药的构造及作用[M]. 北京: 兵器工业出版社, 2001.
[7]
黎春林, 翁佩英. 弹丸膛内运动分析[J]. 弹道学报, 1994, 6(1):45-52.
文章导航

/