[an error occurred while processing this directive] [an error occurred while processing this directive] [an error occurred while processing this directive]
[an error occurred while processing this directive]
弹药技术

设障子弹结构设计与设障能力研究

  • 杭贵云 ,
  • 余文力 ,
  • 王涛 ,
  • 王金涛 ,
  • 李臻
展开
  • 第二炮兵工程大学, 西安 710025

杭贵云(1989-), 男, 湖北十堰人, 硕士研究生, 研究方向: 导弹战斗部工程。

收稿日期: 2014-01-16

  网络出版日期: 2025-05-26

Structure Design and Research on the Setting-barrier Capacity of the Setting-barrier Bullet

  • HANG Guiyun ,
  • YU Wenli ,
  • WANG Tao ,
  • WANG Jintao ,
  • LI Zhen
Expand
  • The Second Artillery Engineering University, Xi’an 710025

Received date: 2014-01-16

  Online published: 2025-05-26

摘要

摘要:文中结合水面舰艇的目标特性, 提出了以封锁水面舰艇甲板为目的的设障子弹, 并提出了一种设障子弹的设计方案。运用LS-DYNA软件, 进行了数值仿真, 模拟了子弹的侵彻过程, 验证了设障原理, 得到了子弹在侵彻靶板过程中的动态响应和不同工况下的设障能力。仿真结果表明:设计的子弹能够满足要求, 达到预期目的。文中的研究可为新型武器的研制开发提供一定的参考。

本文引用格式

杭贵云 , 余文力 , 王涛 , 王金涛 , 李臻 . 设障子弹结构设计与设障能力研究[J]. 弹箭与制导学报, 2015 , 35(1) : 63 -67 . DOI: 10.15892/j.cnki.djzdxb.2015.01.017

Abstract

According to the analysis of the surface warships’characteristic, a new concept for blanking off the band was brought forward and one elementary structural design of the setting-barrier bullet was given out. Some correlated numerical simulation experiments were car ried out to prove the theory of setting barrier and the dynamic response of the bullet during the penetration process and the setting-barrier capacity in different conditions were got by using LS-DYNA. The results showed that the setting-barrier bullet could satisfy the expected function and the design demand. This paper could provide some references for the new designing weapons.

[an error occurred while processing this directive]

参考文献

[1]
曲立树. 航空母舰及其克星[M]. 北京: 兵器工业出版社, 2003.
[2]
孙诗南. 现代航空母舰[M]. 上海: 上海科学普及出版社, 2000.
[3]
陈书海, 张正满. 航空母舰: 海军史上的里程碑[M]. 北京: 国防工业出版社, 2007.
[4]
Marc Andre Meyers. 材料的动力学行为[M]. 张庆明, 等译. 北京: 国防工业出版社, 2006.
[5]
孔祥韶. 大型水面舰艇舷侧防护结构内爆的数值模拟研究[D]. 武汉: 武汉理工大学, 2009.
[6]
龚若来. 穿甲弹侵彻金属靶板的数值模拟[D]. 南京:南京理工大学, 2004.
[7]
许沐华. 钨合金杆弹侵彻复合靶板的实验和数值研究[D]. 合肥: 中国科学技术大学, 2000.
[8]
孙炜海, 文鹤鸣. 锥头弹丸撞击下固支金属厚靶的侵彻与穿透的理论研究[J]. 高压物理学报, 2010, 24(2): 93-101.
[9]
陈小伟, 金建明. 动能深侵彻弹的力学设计(Ⅱ): 弹靶的相关力学分析与实例[J]. 爆炸与冲击, 2006, 26(1): 71-78.
[10]
时党勇, 李裕春, 张胜民. 基于ANSYS /LS-DYNA8. 1 进行显式动力分析[M]. 北京: 清华大学出版社, 2005.
[11]
Zhong Z H. Finite element procedures for contact problems [M]. Oxford: Oxford University Press, 1993.
[12]
Bao, G. Penetrator /target interactions: An interfacial layer approach, ADA90034 [R]. 2001.
文章导航

/

[an error occurred while processing this directive]