弹药技术

黑索今颗粒度对精密注药质量影响的研究

  • 贺玉民 ,
  • 石海城 ,
  • 杨丽君
展开
  • 辽沈工业集团有限公司,沈阳 110045

贺玉民(1962-),男,辽宁沈阳人,研究员,研究方向:智能弹药设计。

收稿日期: 2013-02-05

  网络出版日期: 2025-05-26

The Research on The Influence of Grain Size of Cyclonite on Crecision Couring Charge

  • HE Yumin ,
  • SHI Haicheng ,
  • YANG Lijun
Expand
  • Liaoshen Industries Co. Ltd, Shenyang 110045, China

Received date: 2013-02-05

  Online published: 2025-05-26

摘要

从黑索今的颗粒度对梯黑混合炸药的药浆粘度、沉降速度、注药密度等方面的作用进行了分析,论述了颗粒度对注药质量的影响,通过对黑索今颗粒度的级配原理分析和实际注药验证,通过无损检测验证,确定了采用精密注药战斗部中黑索今的最佳颗粒度。

本文引用格式

贺玉民 , 石海城 , 杨丽君 . 黑索今颗粒度对精密注药质量影响的研究[J]. 弹箭与制导学报, 2013 , 33(3) : 77 -78,82 . DOI: 10.15892/j.cnki.djzdxb.2013.03.040

Abstract

The influences of grain size of cyclonite on density of pouring charge, velocity of sinking and viscosity of charge slurry were analyzed; the effect of grain size on quality of pouring charge was discussed. By analyzing the principle of particle gradation of cyclonite and pouring charge practically and non-destructive testing, optimal grain size of cyclonite within warhead using pouring charge was determined.

参考文献

[1]
樊保龙,胡双启,张金勇,等.压力注装装药工艺在药柱生产中的应用[J].四川兵工学报, 2007(1): 52-54.
[2]
王儒策,赵国志.弹丸终点效应[M].南京: 南京理工大学出版社, 1991.
[3]
卫久泽,余昆,梁小菱. GJB296A-95 黑索今规范[S].国营第八零五厂, 1995.
[4]
陈智刚,王志军,邱可夫A. N.工艺参数对破甲弹作用效果影响的数学模型[J].华北工学院学报, 2001, 22(3): 198-200.
[5]
王儒策,赵国志,杨绍卿.弹药工程[M].北京: 北京理工大学出版社, 2002.
文章导航

/