[an error occurred while processing this directive] [an error occurred while processing this directive] [an error occurred while processing this directive]
[an error occurred while processing this directive]
弹道与气动力技术

倾斜发射导弹燃气流场数值模拟

  • 王伟 ,
  • 王学智 ,
  • 刘少伟
展开
  • 空军工程大学防空反导学院,西安 710051

王伟(1988-),男,山东日照人,硕士研究生,研究方向:兵器发射理论与技术。

收稿日期: 2013-01-05

  网络出版日期: 2025-05-26

Numerical Simulation of Jet Flow for Incline-launched Missile

  • WANG Wei ,
  • WANG Xuezhi ,
  • LIU Shaowei
Expand
  • Air and Missile Defense College, Are Force Engineering University, Xi'an 710051, China

Received date: 2013-01-05

  Online published: 2025-05-26

摘要

为了研究倾斜发射过程中导弹头部下沉对燃气流场分布的影响,文中在进行导弹受力分析的基础上,将导弹运动过程分为两个阶段,分别应用域动分层法和局部网格重构两种动网格更新方法,对导弹发射过程的燃气流场进行数值模拟,得到燃气流场压力和温度分布及其变化规律。研究结果表明,导弹由于重力作用产生偏转,使得导弹上表面气流温度高于下表面。

本文引用格式

王伟 , 王学智 , 刘少伟 . 倾斜发射导弹燃气流场数值模拟[J]. 弹箭与制导学报, 2013 , 33(4) : 127 -130 . DOI: 10.15892/j.cnki.djzdxb.2013.04.045

Abstract

To study the effect of deflection on distribution of jet flow during inclined launching process, based on force analysis of missile, the launching stage was divided into two parts, and dynamic mesh update method was used. The method is used for numerical simulation of the missile launching, pressure and temperature distribution are obtained. The results show that deflection occurs on missile by gravity, making the temperature of upper surface higher than lower surface.

[an error occurred while processing this directive]

参考文献

[1]
卞海忠, 李志刚, 郭丽芳. 无人机箱式发射助推火箭燃气流场数值模拟[J]. 战术导弹技术, 2011 (5): 112- 115.
[2]
姚昌仁, 张波. 火箭导弹发射装置[M]. 北京: 北京理工大学出版社, 1998: 132- 134.
[3]
郝继光, 姜毅, 韩书永,等. 一种新的动网格更新技术及其应用. 弹道学报, 2007, 19 (2): 88- 92.
[4]
王汉平, 吴菊华. 基于CFD的潜射导弹筒口压力场预测. 弹道学报, 2011, 20 (4): 73– 76.
[5]
苗瑞生. 发射气体动力学[M]. 北京: 国防工业出版社, 2006: 124- 127.
文章导航

/

[an error occurred while processing this directive]