[an error occurred while processing this directive] [an error occurred while processing this directive] [an error occurred while processing this directive]
[an error occurred while processing this directive]
火箭技术

基于优化技术的发动机-导弹连接结构设计

  • 刘辉 ,
  • 张会萍 ,
  • 李学峰 ,
  • 白真 ,
  • 蒋晓磊 ,
  • 陈家文
展开
  • 中国兵器工业第203研究所,西安 710065

刘辉(1977-),男,河南安阳人,工程师,研究方向:弹箭结构工艺设计。

收稿日期: 2013-03-08

  网络出版日期: 2025-05-26

Connected Structure Design of Racket-engine and Missile Based on Optimization Techniques

  • LIU Hui ,
  • ZHANG Huiping ,
  • LI Xuefeng ,
  • BAI Zhen ,
  • JIANG Xiaolei ,
  • CHEN Jiawen
Expand
  • No. 203 Research Institute of China Ordnance Industries, Xi'an 710065, China

Received date: 2013-03-08

  Online published: 2025-05-26

摘要

为了探索发射发动机-导弹连接结构的最优设计方案,研究了基于结构优化设计技术的发射发动机-导弹连接结构的设计方法和具体设计方案。通过拓扑优化得出最佳传力路径和材料分布方案,然后结合形状优化技术进行结构细节设计,最终减轻结构重量约22%。

本文引用格式

刘辉 , 张会萍 , 李学峰 , 白真 , 蒋晓磊 , 陈家文 . 基于优化技术的发动机-导弹连接结构设计[J]. 弹箭与制导学报, 2013 , 33(5) : 123 -125 . DOI: 10.15892/j.cnki.djzdxb.2013.05.039

Abstract

A research on connected structure of the racket engine and the missile based on optimization techniques were applied. By the topology optimization method, the best load structure and the best material allotment were found. Then the shape optimization method was applied and the detail design was developed to give out the best structure scenario.

[an error occurred while processing this directive]

参考文献

[1]
陈永当, 张建华, 仝鸿杰,等. 面向火箭滑车底盘设计的变密度多载荷拓扑优化方法[J]. 计算机辅助设计与图形学学报, 2012, 24 (8): 1108- 1112.
[2]
王江波, 张庆民, 冯成良,等. 侵彻弹体局部结构优化设计方法. 科技导报, 2012, 30 (24): 42- 45.
[3]
李延伟, 杨洪波. 大口径平背形主镜轻量化结构优化设计方法 系统仿真学报, 2008, 20 (24): 6851- 6853.
[4]
母德强, 苍鹏, 郗元,等. 大型龙门加工中心多目标优化设计技术. 长春工业大学学报:自然科学版, 2012, 33 (5): 495- 498.
[5]
李初晔, 杨洁, 冯长征. 数控机床关键结构件的优化设计1. 机械设计与制造, 2012 (7): 41- 43.
文章导航

/

[an error occurred while processing this directive]