[an error occurred while processing this directive] [an error occurred while processing this directive] [an error occurred while processing this directive]
[an error occurred while processing this directive]

弹箭与制导学报 >

2013 , Vol. 33 >Issue 5: 75 - 78

DOI: https://doi.org/10.15892/j.cnki.djzdxb.2013.05.050

导弹与制导技术

某型发控盒结构优化设计及分析

  • 谢军虎 ,
  • 刘俊华
展开
  • 中国空空导弹研究院,河南洛阳 471009

谢军虎(1987-),男,陕西合阳人,助理工程师,研究方向:机载导弹发射装置发控系统总体设计。

收稿日期: 2013-01-28

  网络出版日期: 2025-05-26

收起

Structure Optimization Design and Analysis on Control Box of Launcher

  • XIE Junhu ,
  • LIU Junhua
Expand
  • China Airborne Missile Academy, Henan Luoyang 471009, China

Received date: 2013-01-28

  Online published: 2025-05-26

Fold

摘要

在PDM系统中运用UG软件,根据发控盒结构设计的指导思想,在苛刻的尺寸限制的前提条件下,设计出某型发控盒的结构并进行了结构优化设计。利用有限元分析软件ABAQUS对发控盒进行了模态分析,将最终设计方案出图加工并装配成产品,并通过各项交付试验和多次外场试验验证,证明了该发控盒结构设计方案的可行性。

关键词： 发控盒; 结构优化设计; 模态分析

本文引用格式

谢军虎 , 刘俊华 . 某型发控盒结构优化设计及分析[J]. 弹箭与制导学报, 2013 , 33(5) : 75 -78 . DOI: 10.15892/j.cnki.djzdxb.2013.05.050

Abstract

Based on the structure design guiding ideology of the control box of launcher, the structure design and optimal design of a control box of launcher were carried out in the limited and strict size in the PDM system using UG. The mode analysis of the control box was done by using ABAQUS. Then the product was processed and assembled according to the final design, which passed the delivery test and many field tests. As a result, the design scheme was proved to be feasible.

Key words： control box of launcher; structure optimization design; modal analysis

[an error occurred while processing this directive]

参考文献

[1]
廖志忠, 徐日洲, 吴纪海,等. 空空导弹发控系统设计[M]. 北京: 国防工业出版社, 2007.
[2]
邱成悌, 赵惇殳, 蒋全兴. 电子设备结构设计原理[M]. 南京: 东南大学出版社, 2005.
[3]
姚昌仁, 张波. 火箭导弹发射装置设计[M]. 北京: 北京理工大学出版社, 1998.
[4]
谢华, 郗江云, 李建红. Solid Edge 装配设计[M]. 北京: 机械工业出版社, 2004.
[5]
洪如瑾. UG NX CAD 快速入门指导[M]. 北京: 清华大学出版社, 2003.
[6]
刁超, 庄建华. 提高恶劣环境电子设备可靠性的方法[J]. 计算机工程, 2005, 31 (8): 198- 200.
[7]
崔冠宇, 李亮. 电子设备减振设计的随机振动分析[J]. 遥测遥控, 2011, 32 (3): 68- 73.
[8]
丁小东. 电子设备的机械防护设计[J]. 环境技术, 2001 (5): 31- 34.
[9]
杨宇军, 叶松林, 游少雄,等. 插板式 PCB 的內置式减振设计方法及其 PSD 动力学仿真[J]. 振动与冲击, 2007, 26 (2): 39- 42.
Options
文章导航

/

〈 〉

[an error occurred while processing this directive]