定向战斗部直列式多点起爆系统设计

韩克华; 任西; 张玉若; 秦国圣; 褚恩义

doi:10.15892/j.cnki.djzdxb.2013.06.032

弹箭与制导学报 >

2013 , Vol. 33 >Issue 6: 78 - 81

DOI: https://doi.org/10.15892/j.cnki.djzdxb.2013.06.032

导弹与制导技术

定向战斗部直列式多点起爆系统设计

韩克华 ,
任西 ,
张玉若 ,
秦国圣 ,
褚恩义

展开

陕西应用物理化学研究所应用物理化学国家级重点实验室,西安 710061

韩克华(1981-),男,陕西宝鸡人,高级工程师,硕士,研究方向:高新火工系统技术研究。

收稿日期: 2013-01-06

网络出版日期: 2025-05-26

收起

The Design of In-line Multi-spot Initiation System for Directional Warhead

HAN Kehua ,
REN Xi ,
ZHANG Yuruo ,
QIN Guosheng ,
CHU Enyi

Expand

National Key Laboratory of Applied Physics and Chemistry, Shaanxi Applied Physics and Chemistry Research Institute, Xi'an 710061, China

Received date: 2013-01-06

Online published: 2025-05-26

Fold

摘要

文中提出了用于定向战斗部的直列式多点起爆系统设计方法,该设计方法使用了多点冲击片雷管作为起爆源,解决了定向战斗部由于常规雷管的大量使用而导致武器系统安全性、可靠性的下降,以及在实际使用中爆炸逻辑网络传爆序列的能量匹配问题、传爆线路可靠性等较难控制的问题。试验结果表明,直列式多点定向起爆系统能实现定向起爆的功能,多点起爆同步性较好,满足定向战斗部的战术性能指标。

关键词： 定向战斗部; 直列式; 冲击片雷管; 多点起爆; 同步性

本文引用格式

韩克华 , 任西 , 张玉若 , 秦国圣 , 褚恩义 . 定向战斗部直列式多点起爆系统设计[J]. 弹箭与制导学报, 2013 , 33(6) : 78 -81 . DOI: 10.15892/j.cnki.djzdxb.2013.06.032

Abstract

In this paper, the In-line multi-spot initiation system was designed. The in-line multi-spot initiation system adopts multi-EFI as explosive source, the safety and reliability of directional warhead were solved because of many tradition detonator and explosive logic net be used. The analysis results show that the in-line multi-spots initiation system not only can meet the performance demand, but also achieve the purpose and function of directional warhead; what's more, the explosive synchronization of multi-spots is good.

Key words： directional warhead; in-line fuze; exploding foil initiator(EFI); multi-spot initiation; simultaneous time

参考文献

[1]	李记刚, 余文力, 王涛. 定向战斗部的研究现状及发展趋势[J]. 飞航导弹, 2005 (5): 25- 28.
[2]	王树山, 马晓飞, 隋树元,等. 偏心多点起爆战斗部破片飞散实验研究[J]. 北京理工大学学报, 2001, 21 (2): 177- 179.
[3]	孙学清, 张国伟, 杨陕平. 定向战斗部破片飞散方向控制技术研究[J]. 弹箭与制导学报, 2008, 28 (1): 102- 104.
[4]	Wilhelm Earl E. Selectable deployment mode fragment war-head, US 4655 139 [P]. 1987-04-07.
[5]	Wilhelm Earl E. Multi-point warhead initiation system,US 4823701 P. 1989-04-25.
[6]	Talley James C. Aimable warhead, US 5182418 [P]. 1993-01-26.
[7]	Nickolin Tom. Highly integrated firing module[C]// 43rdAnnual Fuze Conference, 1999.
[8]	Randall D Cope. Naval surface warfare center - China LakeOverview[C] // 48th Annual Fuze Conference, 2004.
[9]	Wilhelm Earl E. Antiballistic missile fuse, US 4848239P. 1989-07 – 18.
[10]	Timothy Tobik. Air force fuze technology overview[C]//49th Annual Fuze Conference, 2005.
[11]	王凯民, 符绿化. 定向破片战斗部及其多点起爆系统[J]. 火工品,1995(33): 33-38.
[12]	曹雄, 刘瑛, 胡双启,等. 环形传爆药柱多点起爆数值模拟及威力测试[J]. 火工品,2005(5): 16 – 18.
[13]	安蓉, 曲秀杰, 李世义. 高能多点起爆系统分析及仿真[. 华北工学院测试技术学报,2000,14(6):365 – 373.
[14]	Kennedy D R. A historical review of aimable air defensewarhead technology[C]//18th International Symposium onBallistics, 1999: 618-625.
[15]	Robert Hertlein. EXCALIBUR: A multi-function fuze for amulti-purpose warhead[C]//46th Annual Fuze Confer-ence "The World of Fuzing", 2002.
[16]	MIL-DTL-23659D 电起爆器通用设计规范S.2003.

Options

文章导航

模态框（Modal）标题

摘要

本文引用格式

Abstract

参考文献