[an error occurred while processing this directive] [an error occurred while processing this directive] [an error occurred while processing this directive]
[an error occurred while processing this directive]

弹箭与制导学报 >

2022 , Vol. 42 >Issue 3: 37 - 41

DOI: https://doi.org/10.15892/j.cnki.djzdxb.2022.03.008

火炮身管自紧技术及其特性分析

  • 陈瑶 ,
  • 高永宏 ,
  • 郭传祥
展开
  • 中北大学环境与安全工程学院, 太原 030051

陈瑶(1997—),女,宁夏吴忠人,硕士研究生,研究方向:爆炸加工。

收稿日期: 2021-10-11

  网络出版日期: 2025-02-03

收起

Gun Barrel Self Tightening Technology and its Characteristic Analysis

  • CHEN Yao ,
  • GAO Yonghong ,
  • GUO Chuanxiang
Expand
  • Department of Environmental and Safety Engineering, North University of China, Taiyuan 030051, China

Received date: 2021-10-11

  Online published: 2025-02-03

Fold

摘要

在火炮武器的研究发展过程中,其寿命基本上由火炮身管的寿命决定。而身管自紧技术是延长其使用寿命的主要途径之一。现有的自紧技术有机械自紧、液压自紧和爆炸自紧这3类。以这3类自紧技术为研究对象展开深入研究。得出爆炸自紧技术不需要高压设备,生产周期短,能作用于不同形状内膛身管的自紧,且更加安全。

关键词： 自紧工艺; 内膛加工; 爆炸自紧

本文引用格式

陈瑶 , 高永宏 , 郭传祥 . 火炮身管自紧技术及其特性分析[J]. 弹箭与制导学报, 2022 , 42(3) : 37 -41 . DOI: 10.15892/j.cnki.djzdxb.2022.03.008

Abstract

In the process of research and development of artillery weapon, its life is basically determined by the life of artillery barrel. The self-tightening technology is one of the main ways to prolong its service life. The existing self-tightening technologies include mechanical self-tightening, hydraulic self-tightening and explosive self-tightening. In this paper, these three kinds of self-tightening techniques are used to carry out in-depth research on the object of study. It is concluded that the explosive self-tightening technology does not need high pressure equipment. The production cycle is short, and it can act on the self-tightening of different shapes of bore barrel, and it is more safe.

Key words： self-tightening process; bore processing; explosion self-tightening

[an error occurred while processing this directive]

参考文献

原文顺序 | 文献年度倒序 | 文中引用次数倒序
[1]
顾金贵. 火炮身管自紧技术的发展概况[J]. 现代兵器, 1984(4):34-41.

[2]
金长顺. 火炮身管机械自紧测控系统及组合冲头研究[D]. 南京: 南京理工大学, 2019.

[3]
才鸿年, 张玉斌. 火炮身管自紧技术[M]. 北京: 兵器业出版, 1997:1-2,184,189-190.

[4]
POOK L P. Stress intensity factor expression for regular crack arrays in pressurized cylinders[J]. Fatigue and Fracture Engineering Materials & Structures, 1990, 13: 135-143.

[5]
潘玉田, 刘清郡. 火炮自紧技术[M]. 北京: 兵器工业出版社, 1996.

[6]
陈爱军, 徐诚, 查子初. 自紧身管的疲劳可靠性分析[J]. 力学与实践, 2004, 26(4):52-56.

[7]
郑津洋, 徐平, 王乐勤, 等. 新型全自紧式高压密封装置强度设计[J]. 化工机械, 1994(3):25-29.

[8]
孔庆智, 李艳玲, 罗宏忪. 大口径火炮身管机械自紧前处理工艺生产实践[J]. 材料保护, 2000, 33(3):34-35.

[9]
杨景蕙, 陆玉, 唐蓉城. 机械设计:第二版[M]. 北京: 机械工业出版社, 1992.

[10]
战人瑞, 陶春达. 自增强设备最佳超应变度研究[J]. 石油学报, 1996, 17(4):128-136.

DOI

[11]
郑哲敏, 扬振声. 爆炸加工[M]. 北京: 国防工业出版社, 1981:188.

[12]
王东育. 液压自紧技术应用[J]. 科技风, 2014(23):98.

[13]
王秉愚. 有限元法原理与应用[M]. 北京: 北京工业学院, 1985.

[14]
曾志银. 火炮身管强度设计理论[M]. 北京: 国防工业出版社, 2004:20-200.

[15]
梁兴旺. 小口径火炮自紧身管应力状态分析[D]. 太原: 中北大学, 2019.

[16]
曾志银. 火炮身管自紧残余应力释放规律研究现状[J]. 火炮发射与控制学报, 1997(2):61-63.

[17]
PU S L, CHEN P. Stress intensity factor for radial cracks in a prestressed[J]. Journal of Pressure Vessel Technology, 1983, 105(2): 117-123.

[18]
松全才, 杨崇慧, 金韶华. 炸药理论[M]. 北京: 兵器工业出版社, 1997.

[19]
赵士达. 爆炸容器[J]. 爆炸与冲击, 1989, 9(1):85-95.

[20]
崔晓慧, 蔡永涛. 身管液压自紧加工[J]. 一重技术, 2007 (6):50-51.

Options
文章导航

/

〈 〉

[an error occurred while processing this directive]