弹药技术

陶瓷靶的多片组合效应分析

  • 卿尚波 ,
  • 晏麓晖 ,
  • 曾首义
展开
  • 国防科学技术大学指挥军官基础教育学院,长沙 410072

卿尚波(1983-),男,四川绵竹人,硕士研究生,研究方向:冲击侵彻效应及工程防护。

收稿日期: 2009-05-05

  网络出版日期: 2025-05-28

Studies on Combinational Effect of Multi-ceramics

  • QING Shangbo ,
  • YAN Luhui ,
  • ZENG Shouyi
Expand
  • College of Basic Education for Commanding Officers, NUDT, Changsha 410072, China

Received date: 2009-05-05

  Online published: 2025-05-28

摘要

为了考查多片小尺寸陶瓷靶组合时抗弹性能的影响因素,文中采用光滑离子法对边长为20~80mm的多片陶瓷组合靶抗侵彻问题进行了数值模拟研究,分析了侵彻中陶瓷锥的大小随边长尺寸的变化以及对相邻靶板的影响。结果表明:陶瓷锥底面直径大小受面板边长尺寸影响较大,表现出递增的趋势,但到达一定尺寸后趋于不变。陶瓷板尺寸的大小直接影响着多片陶瓷组合靶的整体抗弹性能。

本文引用格式

卿尚波 , 晏麓晖 , 曾首义 . 陶瓷靶的多片组合效应分析[J]. 弹箭与制导学报, 2010 , 30(3) : 72 -74 . DOI: 10.15892/j.cnki.djzdxb.2010.03.019

Abstract

To research the influence factors to ballistic performance of the target combined with multi-plates of ceramic, the targets impacted by armour-piercing bullets from 20mm to 80mm in sizes, are simulated by FE-SPH. The changes of the ceramic cone with the plate sizes and the influences of the broken panel on adjacent others are analyzed. The results show that the diameter of the ceramic cone increases with the size of the ceramic panel until some size reached. And the size of the ceramic plate affects the ballistic performance of the target.

参考文献

[1]
DenReijer P C. Impact on ceramic faced armour[D]. Delft, The Netherlands: Delft University of Technology, 1991.
[2]
Fellows N A, Barton P C. Development of impact model for ceramic-faced semi-infinite armour[J]. Int J Impact Eng, 1999, 22 (8): 793- 811.
[3]
王道荣. 高速侵彻现象的工程分析方法和数值模拟研究[D]. 合肥: 中国科技大学, 2002.
[4]
李永池, 王道荣, 姚磊,等. 陶瓷材料的抗侵彻机理和陶瓷锥演化的数值模拟[J]. 弹道学报, 2004, 16 (4): 12- 17.
[5]
Madhu V, Ramanjaneyulu K. An experimental study of penetration resistance of ceramic armour subjected to projectile impact[J]. Int. J.Impact Eng, 2005, 32 (1/4): 337- 350.
[6]
Rosset W S. Patterned armor performance evaluation[J]. Int J Impact Eng, 2005, 31 (10): 1223- 1234.
[7]
申志强. 穿甲子弹偏心入射陶瓷复合靶数值模拟分析[D]. 长沙: 国防科技大学, 2007.
文章导航

/