导弹与制导技术

捷联惯性导航系统加速度计误差建模与标定补偿

  • 吴平 ,
  • 雷虎民 ,
  • 邵雷
展开
  • 1 空军工程大学导弹学院,陕西三原 713800
    2 空军地空导弹装备检验所,陕西三原 713800

吴平(1985-),男,四川资阳人,硕士研究生,研究方向:惯性导航与组合导航。

收稿日期: 2009-12-07

  网络出版日期: 2025-05-28

基金资助

航空基金(20090196005)

Error Modeling and Calibration of Accelerometer in Strapdown Inertial Navigation System

  • WU Ping ,
  • LEI Humin ,
  • SHAO Lei
Expand
  • 1 The Missile Institute, Air Force Engineering University, Shaanxi Sanyuan 713800, China
    2 The Ground-to-air Missile Equipment Verification Institute, Shaanxi Sanyuan 713800, China

Received date: 2009-12-07

  Online published: 2025-05-28

摘要

研究了车载筒装导弹状态下捷联惯性导航系统加速度计误差系数标定问题。首先对加速度计进行了误差分析,在此基础上推导了误差模型,提出了以车的机动作为激励方式,设计了一种不开箱标定方法。仿真结果表明,该误差模型正确且标定方法能够对误差进行补偿,从而提高导航精度。

本文引用格式

吴平 , 雷虎民 , 邵雷 . 捷联惯性导航系统加速度计误差建模与标定补偿[J]. 弹箭与制导学报, 2010 , 30(5) : 5 -8 . DOI: 10.15892/j.cnki.djzdxb.2010.05.056

Abstract

In this paper, the problem of calibrating the error coefficient of accelerometer in strapdown inertial navigation system under the state of vehicle missile in container. The error model was deduced based on analyzing error of accelerometer. A calibration method was designed without opening the box by the way of vehicle movement as actuator mode. The simulations show that the error model is correct and the calibration can compensate the error and improve the precision of navigation.

参考文献

[1]
熊智, 刘建业, 林雪原. 激光陀螺捷联惯性导航系统中惯性器件误差补偿技术[J]. 上海交通大学学报, 2003. 37 (11): 1795- 1799.
[2]
胡小明, 刘越, 王涌天. 加速度计偏置及敏感度测量方法的研究[J]. 压电与声光, 2006, 28 (6): 728- 730.
[3]
王新龙, 申功勋, 何乃刚. 一种有效的加速度计静态模型辨识方法[J]. 仪器仪表学报, 2003, 24 (1): 57- 60.
[4]
张勇, 王宏力, 周晓刚. 惯性测量组合滚动标定中的边界问题分析[J]. 弹箭与制导学报, 2007, 27 (1): 80- 82.
[5]
何昆鹏, 吴俊伟, 李光春. 光纤捷联惯性测量元件在无安装基准的标定方法[J]. 北京理工大学学报, 2009, 29 (3): 219- 223.
[6]
徐兵华, 杨孟兴. 激光陀螺捷联惯性导航系统的误差标定系数研究[J]. 导弹与航天运载技术, 2008, 22 (4): 22- 25.
[7]
邢海峰, 任顺清, 陈雪. 加速度计二次奇异项系数的形成机理与标定方法[J]. 航天控制, 2009, 27 (2): 91- 95.
文章导航

/