[an error occurred while processing this directive] [an error occurred while processing this directive] [an error occurred while processing this directive]
[an error occurred while processing this directive]

弹箭与制导学报 >

2010 , Vol. 30 >Issue 5: 90 - 92

DOI: https://doi.org/10.15892/j.cnki.djzdxb.2010.05.031

弹药技术

陶瓷复合装甲不同区域抗弹丸穿甲能力试验研究

  • 胡丽萍 ,
  • 王和平 ,
  • 王智慧 ,
  • 侯圣英 ,
  • 满红
展开
  • 中国兵器科学研究院宁波分院,山东烟台 264003

胡丽萍(1969-),女,内蒙古包头市人,高级工程师,硕士,研究方向:装甲防护。

收稿日期: 2009-08-31

  网络出版日期: 2025-05-28

收起

Experiment on Ballistic Property of Different Impact Location of Ceramic Composite Armor

  • HU Liping ,
  • WANG Heping ,
  • WANG Zhihui ,
  • HOU Shengying ,
  • MAN Hong
Expand
  • Ningbo Branch, Ordnance Science and Research Academy of China, Shandong Yantai 264003, China

Received date: 2009-08-31

  Online published: 2025-05-28

Fold

摘要

为优化设计陶瓷/高强钢/铝合金复合装甲板,研究了陶瓷/钢/铝合金复合结构中陶瓷面板不同区域抗12.7mm穿甲子弹垂直侵彻的性能。通过弹道试验得到装甲的垂直穿深、钢背板的变形和穿孔模式等。结果表明,弹着点对靶板抗弹机理有重要影响,弹着点在“中心区”和“偏心区”时,可以形成陶瓷锥,粉碎区完整;当弹着点在“边界区”时不能形成陶瓷锥,靶板的抗弹能力显著下降。

关键词： 弹丸; 复合装甲; 弹道试验; 抗弹性能

本文引用格式

胡丽萍 , 王和平 , 王智慧 , 侯圣英 , 满红 . 陶瓷复合装甲不同区域抗弹丸穿甲能力试验研究[J]. 弹箭与制导学报, 2010 , 30(5) : 90 -92 . DOI: 10.15892/j.cnki.djzdxb.2010.05.031

Abstract

In order to optimize the ceramic/high strength steel/aluminum alloy composite armor, ballistic experiment of different range on the ceramic bearer plate against 12.7 mm amour piercing projectile (APP) were investigated in this paper. Penetration depth, deformation and perforation mode of the chip-off plates were obtained. The experiment results show that influence of impact location on the mechanism of the ceramic bearer plate is important.

Key words： armor-piercing projectile; composite armor; ballistic experiment; ballistic property

[an error occurred while processing this directive]

参考文献

[1]
姜春兰, 陈放, 李明,等. 钨球对陶瓷/复合靶的侵彻与贯穿[J]. 兵工学报, 2001, 22(1): 37- 40.
[2]
张自强, 赵宝荣, 张锐生,等. 装甲防护技术基础[M]. 北京: 兵器工业出版社, 2000.
[3]
Rosset W S. Patterned armor performance evaluation[J]. Int. J Impact Engineering, 2005, 31(10): 1223- 1234.
[4]
Lopez-Puente J, Arias A, Zaera R, et al. The effect of the thickness of adhesive layer on the ballistic limit of ce-ramic/metal armors: an experimental and numerical study[J]. Int J Impact Engineering, 2006, 32(3): 321- 336.
[5]
张明, 何煌, 曾首义. 穿甲子弹侵彻陶瓷复合装甲的有限元分析[J]. 先进制造技术, 2006, 25(7): 37- 39.
[6]
蒋志刚, 申志强, 曾首义,等. 穿甲子弹侵彻陶瓷/钢复合靶板试验研究[J]. 弹道学报, 2007, 19(4): 37- 42.
Options
文章导航

/

〈 〉

[an error occurred while processing this directive]