[an error occurred while processing this directive] [an error occurred while processing this directive] [an error occurred while processing this directive]
[an error occurred while processing this directive]
弹药技术

反坦克导弹对装甲目标射击起爆率分析

  • 段振国 ,
  • 卢伟 ,
  • 陈军 ,
  • 刘亚滨 ,
  • 陈煜强
展开
  • 解放军炮兵指挥学院,河北廊坊 065000

段振国(1963-),男,吉林农安人,教授,硕士生导师,研究方向:作战指挥。

收稿日期: 2010-04-20

  网络出版日期: 2025-05-28

The Analysis and Simulation on Detonated Rate of Anti-tank Missile Attacking on Armored Target

  • DUAN Zhenguo ,
  • LU Wei ,
  • CHEN Jun ,
  • LIU Yabin ,
  • CHEN Yuqiang
Expand
  • Artillery Command Academy of DLA, Hebei Langfang 065000, China

Received date: 2010-04-20

  Online published: 2025-05-28

摘要

在建立坦克形体描述模型和反坦克导弹系统仿真模型的基础上,构建半实物仿真系统,进行闭环仿真实验,通过对起爆条件的判定,得出反坦克导弹对装甲目标射击时起爆率数据,提出提高起爆率的具体方法和途径。

本文引用格式

段振国 , 卢伟 , 陈军 , 刘亚滨 , 陈煜强 . 反坦克导弹对装甲目标射击起爆率分析[J]. 弹箭与制导学报, 2010 , 30(6) : 100 -102 . DOI: 10.15892/j.cnki.djzdxb.2010.06.013

Abstract

Based on the model of tank and anti-tank missile system, a hardware-in-the-loop system of anti-tank missile was set up. The close-loop simulation experiment was carried out. The material data of detonated rate of shooting at armored target by anti-tank missile was obtained through determining the detonated condition. The practical way on how to improve the detonated rate during firing was given.

[an error occurred while processing this directive]

参考文献

[1]
黄文香. 反坦克导弹射击原理[M]. 廊坊: 廊坊陆军导弹学院, 1996.
[2]
林智源. 现代坦克组成与发展[M]. 哈尔滨: 黑龙江科学技术出版社, 1983.
[3]
郑振忠. 装甲装备战斗毁伤学概论[M]. 北京: 兵器工业出版社, 2004.
[4]
段振国. 反坦克导弹对装甲目标毁伤效应分析与仿真[R]. 国防科技报告, 2006.
文章导航

/

[an error occurred while processing this directive]