[an error occurred while processing this directive] [an error occurred while processing this directive]
[an error occurred while processing this directive]Digital Signal Processing Method of Flux Gate Signal
Received date: 2017-07-03
Online published: 2025-05-28
为了提高磁通门的动态测量范围、测量精度及其工作稳定性,提出了一种以DSP数字信号处理器为主的磁通门信号处理方法。根据双铁芯磁通门的基本原理,对磁通门感应信号进行模数转换、数字波形“门”处理和数字带通滤波等数字信号处理。仿真结果表明,此种磁通门数字信号处理方法可有效减少磁通门噪声,提高磁通门灵敏度和测量精度,为数字磁通门磁强计的应用研究提供了参考。
关键词: 磁通门; 数字信号处理; 数字信号波形“门”处理; 数字带通滤波
杨智杰 , 陈国光 , 朱宜家 , 范旭 , 白敦卓 . 磁通门信号的数字信号处理方法[J]. 弹箭与制导学报, 2018 , 38(1) : 31 -34,40 . DOI: 10.15892/j.cnki.djzdxb.2018.01.008
In order to expand the dynamic measuring range of flux gate and improve the measurement accuracy and the work stability of flux gate, a flux gate signal processing method based on DSP digital signal processor was proposed. According to the basic principle of double iron core flux door, the analog to digital conversion of flux gate induction signal, digital waveform "gate" processing and digital bandpass filtering and other digital signal processing were carried out. The simulation results show that the flux gate signal processing method can effectively reduce the flux gate noise, improve the flux gate sensitivity and measurement accuracy, and also provide a reference for the application of digital flux gate magnetometer.
| [1] | 许晖, 曹永辉, 石秀华. 基于磁通门技术的方位传感器设计[J]. 仪表技术与传感器, 2003 (1): 14-16. |
| [2] | 姚振宁, 刘胜道, 杨明明. 基于ARM的三端式磁通门传感器[J]. 仪表技术与传感器, 2011 (3): 3-5. |
| [3] | 左超, 杨晓非, 刘腾飞. 基于FPGA的高灵敏度数字磁通门设计[J]. 仪表技术与传感器, 2010 (9): 57-59. |
| [4] | 刘仕伟, 刘诗斌. 基于FPGA的数字磁通门传感器系统设计和实现[J]. 现代电子技术, 2011, 34(12): 198-200. |
| [5] | RIPKA P. Magnetic sensors and magnetometers[M]. Boston: Artech House Publishers, 2000: 97-98, 113-114. |
| [6] | 曹红松, 陈国光, 赵捍东,等. 姿态测试用磁通门磁强计的设计[J]. 弹道学报, 2002, 4(2): 79– 83. |
| [7] | 张学孚, 陆怡良. 磁通门技术[M]. 北京: 国防工业出版社, 1995: 50-51. |
| [8] | 崔智军, 杨尚林. 基于等效铁芯电感的磁通门HSPICE分析模型[J]. 传感技术学报, 2016, 29(11): 1673-1677. |
| [9] | 吕冰. 磁通门传感器与误差修正技术[D]. 北京: 中国舰船研究院, 2014. |
/
| 〈 |
|
〉 |