相关技术

多面交会姿态测量方法研究

  • 王颖 ,
  • 葛超 ,
  • 崔铁成
展开
  • 中国白城兵器试验中心,吉林白城 137000

王颖(1972-),女,吉林白城人,工程师,硕士,主要研究方向:兵器工程。

收稿日期: 2016-06-02

  网络出版日期: 2025-05-28

Research on Attitude Measurement of Polyhedral Intersection

  • WANG Ying ,
  • GE Chao ,
  • CUI Tiecheng
Expand
  • Baicheng Ordance Test Center of China, Jilin Baicheng 137000, China

Received date: 2016-06-02

  Online published: 2025-05-28

摘要

因测角误差、大气折射、判读误差等因素的影响,面面交会法计算的姿态角存在一定的误差,面面交会角较小时,甚至是错误的。文中通过判读获得空间目标在多台光电经纬仪靶面的方向矢量,建立非线性误差模型,并结合最小二乘法与L-M迭代法求解目标在空间的方向矢量,进而获得目标的姿态角。该方法可减少因面与面夹角较小带来误差或错误,计算精度较高。

本文引用格式

王颖 , 葛超 , 崔铁成 . 多面交会姿态测量方法研究[J]. 弹箭与制导学报, 2017 , 37(4) : 165 -167 . DOI: 10.15892/j.cnki.djzdxb.2017.04.038

Abstract

Because of the influence of the angle error, the atmospheric refraction and the error of the interpretation, the attitude angle calculated by the plane intersection method had some errors, and when the plane intersection angle was small, the result was even wrong. In this paper, through the interpretation of the direction vector of space target on multiple photo-electric theodolite target surface, the nonlinear error model was established, and combined with the least square method and L-M iterative method for solving the direction vector of the target in space to get the target attitude angle. This method could reduce errors or mistakes due to the small angle between the surface and the surface, and the calculation accuracy was higher.

参考文献

[1]
崔彦平 运动目标姿态与速度测量的理论及实验研究[D]. 天津: 天津大学精密仪器与光电子工程学院, 2006:1-8.
[2]
于起峰, 尚洋. 摄像测量学原理与应用研究[M]: 北京: 科学出版社, 2009:31-47.
[3]
李明奎. 非线性模型空间测量数据处理理论及其应用[M]. 北京: 化学工业出版社, 2013:14-27.
[4]
刘利生. 外弹道测量数据处理[M]. 北京: 国防工业出版社, 2002:16-21.
文章导航

/