[an error occurred while processing this directive] [an error occurred while processing this directive] [an error occurred while processing this directive]
[an error occurred while processing this directive]

弹箭与制导学报 >

2017 , Vol. 37 >Issue 3: 147 - 151

DOI: https://doi.org/10.15892/j.cnki.djzdxb.2017.03.037

相关技术

基于系统辨识的冲压发动机动态模型分析

  • 梁俊龙 ,
  • 张贵田 ,
  • 胡宝文
展开
  • 1 西北工业大学固体火箭发动机燃烧、热结构与内流场国防科技重点实验室,西安 710072
    2 西北工业大学航天学院,西安 710072

梁俊龙(1977-),男,河南桐柏人,研究员,博士研究生,研究方向:航空宇航推进理论与工程。

收稿日期: 2016-07-20

  网络出版日期: 2025-05-28

收起

Dynamic Characteristic Model Analysis of Ramjet Engine Based on the System Identification Method

  • LIANG Junlong ,
  • ZHANG Guitian ,
  • HU Baowen
Expand
  • 1 National Key Laboratory of Combustion Flow and Thermo-structure, Northwestern Polytechnical University, Xi'an 710072, China
    2 School of Astronautics, Northwestern Polytechnical University, Xi'an 710072, China

Received date: 2016-07-20

  Online published: 2025-05-28

Fold

摘要

冲压发动机动态模型是研究控制系统的基础,动态模型的准确性直接影响控制方案的有效性。为了获得面向控制的高精度低阶动态模型,利用试验数据,理论分析传递函数模型,选择误差平方和最小作为辨识准则,并利用非线性最小二乘法对模型进行辨识,获得了燃油控制系统中燃油流量对燃油指令的传递函数模型。进而将该模型和发动机气路通道模型结合起来,建立了发动机推力对燃油流量的传递函数模型。辨识模型的时域特性曲线与试验数据符合得很好,能够代表发动机系统的主要动态特性。

关键词： 冲压发动机; 动态模型; 燃油控制系统; 传递函数; 参数辨识

本文引用格式

梁俊龙 , 张贵田 , 胡宝文 . 基于系统辨识的冲压发动机动态模型分析[J]. 弹箭与制导学报, 2017 , 37(3) : 147 -151 . DOI: 10.15892/j.cnki.djzdxb.2017.03.037

Abstract

The dynamic model of ramjet is fundamental for control system of ramjet. Furthermore, the accuracy of dynamic model directly impacts the viability of control scheme. In order to get control-oriented high accuracy dynamic model with low order, according to the test results, the transfer function model of the theoretical analysis, select the minimum error sum of squares as the system identification criterion, and to identify the model by using nonlinear least squares method, the transfer function model of fuel flow in fuel control system is generated. By combining this model with the engine air path model, the transfer function model of the engine thrust to the fuel flow is established. The time domain characteristic curve of the identification model is in good agreement with the test results, which can represent the main dynamic characteristics of the engine system.

Key words： ramjet engine; dynamic model; fuel control system; transfer function; system identification

[an error occurred while processing this directive]

参考文献

[1]
马杰,梁俊龙. 火箭推进,2011,37(4):12-17.
[2]
龚春林,谷良贤,袁建平. 飞航导弹基于响应面近似技术的并行子空间优化设计[J].西北工业大学学报,2005,22(3):393-395.
[3]
刘恒军,沙建科,王华. 冲压发动机导弹弹道多目标优化[J].系统仿真学报,2009,21(9):2764-2766.
[4]
谢光华,孟丽,薛恩,等. 液体冲压发动机控制系统半实物仿真[J].推进技术,2001,22(6):451-453.
[5]
刘华,雍雪君,梁俊龙,等. 超声速进气道及冲压发动机动态特性分析[J].火箭推进,2013,38(3):17-22.
[6]
QIN Yanping,LIANG Junlong,LI Bin,et al.Investigation of ramjet engine dynamics based on genetic algorithm[C]//14th International Space Conference of Pacific-basin Societies.[S.l.: s.n.],2014.
[7]
张宏,陈玉春,蔡大虎,等. 液体冲压发动机仿真模型研究[J].计算机仿真,2008,25(7):70-72.
[8]
聂玲聪,朴胜志,吴智锋,等. 几何可调液体冲压发动机多变量控制算法研究[J].推进技术,2013,34 (12):1690-1695.
[9]
GUPTA N K,GUPTA B K,ANANTHKRISHNAN N,et al.Integrated modeling and simulation of an air-breathing combustion system dynamics: AIAA 2007-6374[R].[S.l.: s.n.],2007.
[10]
KUMAR P B C,GUPTA N K,ANANTHKRISHNAN N, et al.Modeling,dynamic simulation,and controller design for an air-breathing combustion system: AIAA 2009-708[R][S.l.: s.n.],2009.
[11]
郭迎清,王海泉. 涡扇发动机模型辨识及其控制器设计[J].现代制造工程,2006(9):73-75.
[12]
李辉,俞进,李淑英,等.基于支持向量机的燃气轮机启动过程建模[J].燃气轮机技术,2012,25(1):48-51.
[13]
梅晓川.基于改进BP 网络的航空发动机起动过程辨识[J].航空计算技术,2009,39(6):58-61.
[14]
王昕.流量调节器动态特性研究[J].火箭推进, 2004,30(3):19-24.
[15]
李吉.X6 发动机燃油调节器建模与仿真研究[D].西安: 西北工业大学,2006.
[16]
冯海峰,樊丁.某型航空涡轴发动机燃油调节器建模与仿真[J].计算机仿真,2007,24(12):45-48.
[17]
何远令,龚建政,石恒,等.燃气轮机燃油调节器的建模与仿真研究[J].舰船电子工程,2009,29 (12):145-148.
[18]
林峰,马静,王镛根.基于VC + + .Net 与Matlab的燃油调节器仿真[J].计算机仿真,2005,22 (12):41-44.
[19]
尤裕荣,赵双龙,吴宝元,等.基于AMESim 的冲压发动机燃油调节器动态特性仿真[J].火箭推进,2010, 36(4):13-15.
[20]
马静,王镛根.某型导弹燃油调节器的建模及仿真研究[J].计算机仿真,2003,20(9):36-38.
[21]
马静,王镛根.某型燃油调节器的建模及仿真研究[J].液压气动与密封,2002(5):13-15.
[22]
秦艳平,李斌,梁俊龙,等.面向控制的燃油调节器动 态特性研究[J].火箭推进,2012,18(5):7-12.
Options
文章导航

/

〈 〉

[an error occurred while processing this directive]