通用末端防御武器系统数据录取评估设备设计与实现

  • 徐向毅 ,
  • 张宏亮
展开
  • 驻航天科工集团210所军事代表室,西安 710065

徐向毅(1980-),男,陕西蓝田人,工程师,研究方向:通用末端防御武器系统高炮车辆的质量管理。

收稿日期: 2017-07-19

  网络出版日期: 2025-05-29

Design and Implementation of Data Recording and Assessing Equipment for UTDWS

  • XU Xiangyi ,
  • ZHANG Hongliang
Expand
  • Military Representative Office in No. 210 Institute of CASIC, Xi'an 710065, China

Received date: 2017-07-19

  Online published: 2025-05-29

摘要

针对某通用末端防御武器系统组成结构复杂、系统间网络通信数据量大、开发阶段缺少有效的故障隔离定位手段、试验阶段缺少有效的精度评估手段的实际情况,采用网络报文抓包、数据分析和精度统计的方法,设计实现了某型通用末端防御武器系统数据录取评估设备。该设备在武器系统联调试验中取得了很好的应用效果,可有效提高武器系统科研生产试验效率。

本文引用格式

徐向毅 , 张宏亮 . 通用末端防御武器系统数据录取评估设备设计与实现[J]. 弹箭与制导学报, 2018 , 38(6) : 140 -144,148 . DOI: 10.15892/j.cnki.djzdxb.2018.06.031

Abstract

With a complex composition structure, the UTDWS (Universal Terminal Defense Weapon System) has a large amount of network communication data between systems and it lacks of effective fault isolation and positioning means at the development stage, and effective precision evaluation means at the test stage. Aiming at the facts above, the method of network packet capture, data analysis, and precision statistics methods is used to design and implement data recording and assessing equipment for the UTDWS. The equipment has achieved good results in the closed loop test of the weapon system, and can effectively improve the efficiency of scientific research, production, and test of weapon system.

参考文献

[1]
徐培德, 谭东风. 武器系统分析[M]. 长沙: 国防科技大学出版社, 2001: 10-15.
[2]
郭凯. 基于WinPcap 的数据包捕获系统的设计与实现[D]. 西安: 西安电子科技大学, 2013.
[3]
李康, 黄胜, 赵辉. GPS坐标系的转换及其在姿态求解中的应用[J]. 指挥控制与仿真, 2008, 30(5): 113-115.
[4]
夏小华, 刘奎永, 冯元伟. 舰炮武器试验中目标坐标真值修正方法[J]. 指挥控制与仿真, 2012, 34(6): 134-136.
[5]
中国人民解放军总装备部军事训练教材编辑工作委员会. 试验数据的统计分析[M]. 北京: 国防工业出版社, 2001: 82-154.
[6]
朱莹, 李文才, 段刚. 高炮火控精度分析方法[J]. 兵工自动化, 2006, 25(8): 1-2.
[7]
付小锋, 梁先洪, 张桂花, 等. 弹丸飞行时间拟合误差对射击诸元误差的影响[J]. 火力与指挥控制, 2013, 38(7): 13-15.
文章导航

/