[an error occurred while processing this directive] [an error occurred while processing this directive] [an error occurred while processing this directive]
[an error occurred while processing this directive]

二次起爆装置抛射机构设计及特性研究

  • 赵彩慧 1 ,
  • 李建平 1 ,
  • 贾晓亮 2 ,
  • 张莹 2
展开
  • 1 北京理工大学爆炸科学与技术国家重点实验室,北京 100081
  • 2 辽宁锦华机电有限公司,辽宁 葫芦岛 125000

赵彩慧(1997—),女,山西长治人,硕士研究生,研究方向:云雾爆轰。

收稿日期: 2021-11-16

  网络出版日期: 2025-05-29

Design and Characteristic Study of Ejection Mechanism of Twice-detonating Device

  • ZHAO Caihui 1 ,
  • LI Jianping 1 ,
  • JIA Xiaoliang 2 ,
  • ZHANG Ying 2
Expand
  • 1 State Key Laboratory of Explosion Science and Technology, Beijing Institute of Technology, Beijing 100081, China
  • 2 Liaoning Jinhua Electromechanical Co., Ltd., Huludao 125000, Liaoning, China

Received date: 2021-11-16

  Online published: 2025-05-29

摘要

为提高高落速云爆弹云雾爆轰可靠性,设计了二次起爆装置及抛射机构,通过现场抛射试验的方法考核了抛射机构的强度及抛射可靠性。研究了抛射药质量、固定挡板的螺钉数量对二次起爆装置抛射速度的影响,得到了随抛射药质量增加,二次起爆装置的抛射速度逐渐加大,且二者呈幂指数关系;同时随着固定挡板的螺钉数增多,二次起爆装置的抛射速度逐渐减小。研究结果为合理设计抛射药药量及螺钉数获得理想抛射速度,实现对二次起爆装置的落点及起爆时机的控制提供理论支持及数据支撑。

本文引用格式

赵彩慧 , 李建平 , 贾晓亮 , 张莹 . 二次起爆装置抛射机构设计及特性研究[J]. 弹箭与制导学报, 2022 , 42(2) : 111 -116 . DOI: 10.15892/j.cnki.djzdxb.2022.02.020

Abstract

In order to improve the reliability of cloud detonation of high falling velocity cloud detonation bomb, a twice-detonating device and an ejection mechanism are designed in this paper. The strength and reliability of the ejection mechanism are evaluated by the method of field ejection test. The influence of projectile mass and the number of screws fixing baffle plate on the ejection velocity of the twice-detonating device is studied. It is found that the ejection velocity of the twice-detonating device increases gradually with the increase of projectile mass, and the relationship between the two is exponential. At the same time, with the increase of the number of screws fixing the baffle plate, the ejection velocity of the twice-detonating device decreases gradually. The results provide theoretical support and data support for rational design of projectile dosage and screw number to obtain ideal ejection velocity, and for controlling the drop point and initiation time of the twice-detonating device.

[an error occurred while processing this directive]
[1]
白春华, 梁慧敏, 李建平. 云雾爆轰[M]. 北京: 科学出版社, 2012.

[2]
席志德, 解立峰, 刘家骢, 等. 高速运动液体燃料爆炸抛撒模型的建立[J]. 弹道学报, 2004, 16(2):80-85.

[3]
席志德, 解立峰, 刘家骢, 等. 竖直下抛液体燃料爆炸抛撒的初步数值研究[J]. 爆炸与冲击, 2004, 24(3):240-244.

[4]
白春华, 李建平. 航弹尾流场数值模拟及柔性开舱可靠性分析[J]. 北京理工大学学报, 2005, 25(7):585-589.

[5]
王世英, 王仲琦, 计东奎. 云爆战斗部动态条件下云爆剂抛撒云团形态研究[J]. 弹箭与制导学报, 2018, 38(4):1-5.

DOI

[6]
刘丽娟. 瞬态多相云雾爆轰特性及其传播规律[D]. 北京: 北京理工大学, 2019.

[7]
王晔. 大体积燃料空气混合物动态爆轰问题研究[D]. 北京: 北京理工大学, 2017.

[8]
王晔, 白春华, 李建平. 动态云雾形成及爆轰场特性[J]. 含能材料, 2017, 25(6):466-471.

[9]
YE C L, ZHANG Q. Optimal falling track design for twice-detonating fuze of double-event fuel-air explosive with high speed[J]. Defence Science Journal, 2020, 70(4): 366-373.

[10]
姜仁元. 云爆弹及其引信[J]. 现代引信, 1990(1):33-38.

[11]
姜仁元, 李定禾, 王政时. 云雾爆轰引信炸点位置及延期时间的确定[J]. 现代引信, 1991(1):32-35.

[12]
李定禾. 云爆弹二次引信抛射时环境参量测试[J]. 现代引信, 1992(2):39-40.

[13]
李定和. 云爆弹云雾引信抛射轨迹的研究[J]. 兵工学报, 1993(2):74-77.

文章导航

/

[an error occurred while processing this directive]