[an error occurred while processing this directive] [an error occurred while processing this directive] [an error occurred while processing this directive]
[an error occurred while processing this directive]

弹箭与制导学报 >

2012 , Vol. 32 >Issue 1: 81 - 84

DOI: https://doi.org/10.15892/j.cnki.djzdxb.2012.01.042

弹药技术

圆锥罩结构和起爆方式对聚能射流形成的影响*

  • 陈顺祥 ,
  • 夏薇 ,
  • 张志春
展开
  • 第二炮兵工程学院,西安 710025

陈顺祥(1958-),男,浙江衢洲人,副教授,研究方向:战斗部结构力学。

收稿日期: 2011-03-28

  网络出版日期: 2025-05-29

收起

The Effects of Structure on Conical Shaped Charge Jet Formation Process

  • CHEN Shunxiang ,
  • XIA Wei ,
  • ZHANG Zhichun
Expand
  • The Second Artillery Engineering College, Xi'an 710025, China

Received date: 2011-03-28

  Online published: 2025-05-29

Fold

摘要

为了研究圆锥罩聚能射流形成的影响因素,通过Lagrangian显式动力学有限元方法对圆锥罩聚能射流的形成过程进行了数值计算。采用对称罚函数接触算法处理炸药和圆锥罩之间接触,采用网格自适应算法防止网格严重畸变造成的计算中断。根据数值计算的结果深入分析了圆锥罩厚度、圆锥罩锥角和起爆方式对聚能射流形状和速度的影响,得到了射流形状和速度的变化规律,为圆锥罩聚能射流的优化设计提供了参考依据。

关键词： 聚能射流; 圆锥罩; 有限元; 射流形成

本文引用格式

陈顺祥 , 夏薇 , 张志春 . 圆锥罩结构和起爆方式对聚能射流形成的影响*[J]. 弹箭与制导学报, 2012 , 32(1) : 81 -84 . DOI: 10.15892/j.cnki.djzdxb.2012.01.042

Abstract

The formation process of conical shaped charge jet was calculated using Lagrangian explicit dynamic finite element method. The symmetrical penalty method was adopted for the contact between the shaped charge and the conical liner, and the h-adaptive method was adopted to prevent the extremely distorted mesh. The effects of the liner's thickness, the liner's cone angle and ignition mode on the performance of conical shaped charge jet were studied, and the change laws for the jet shape and jet velocity were obtained, which can provide reference for the optimization design of conical shaped jet.

Key words： shaped charge jet; conical liner; finite element method; jet formation

[an error occurred while processing this directive]

参考文献

[1]
顾红军, 刘宏伟. 聚能射流及防护[M]. 北京: 国防工业出版社, 2009.
[2]
王勖成. 有限单元法[M]. 北京: 清华大学出版社, 2003.
[3]
T Belytschko, WK Liu, B Moran. Nonlinear finite ele-ments for continua and structures[M]. John Wiley andSons, 2000.
[4]
OC Zienkiewicz, R L Taylor. The finite element method Vol-ume 2: Solid mechanics[M]. Butterworth-Heinemann, 2000.
[5]
Patrice Coorevits, Emmanuel Bellenger. Alternative mesh opti-mality criteria for hradaptive finite element method[J]. FiniteElements in Analysis and Design, 2004, 40 9/10: 1195- 1215.
[6]
GC Bessette, E B Becker, LM Taylor, et al. Modeling ofimpact problems using an h-adaptive, explicit Lagrang-ian finite element method in three dimensions[J]. Com-put. Methods Appl. Mech. Engrgy, 2003, 192 13/14: 1649- 1679.
[7]
王志军, 尹建平. 弹药学[M]. 北京: 北京理工大学出版社, 2005.
[8]
GR Johnson, W H Cook. A constitutive model and datafor metals subjected to large strain rates and high tem-peratures[C]// Proceeding 7th International Symposiumon Ballistics, 1983: 541- 548.
[9]
GR Johnson, W H Cook. Fracture characteristics of threemetals subjected to various strains, strain rates, temperatures, and pressures[J]. Engineering Fracture Mechan-ics, 1985, 21 (1): 31- 48.
Options
文章导航

/

〈 〉

[an error occurred while processing this directive]