[an error occurred while processing this directive] [an error occurred while processing this directive] [an error occurred while processing this directive]
[an error occurred while processing this directive]

弹箭与制导学报 >

2012 , Vol. 32 >Issue 1: 78 - 80,84

DOI: https://doi.org/10.15892/j.cnki.djzdxb.2012.01.002

弹药技术

弹丸对铝合金装甲板斜侵彻的数值模拟

  • 刘文辉 ,
  • 胡忠举 ,
  • 刘德顺 ,
  • 叶凌英
展开
  • 1 湖南科技大学机电工程学院,湖南湘潭 411201
    2 中南大学材料科学与工程学院,长沙 410083

刘文辉(1978-),男,湖南攸县人,副教授,博士,研究方向:高强高韧铝合金性能研究。

收稿日期: 2011-04-21

  网络出版日期: 2025-05-29

基金资助

国家自然科学基金(51105139);湖南省自然科学湘潭联合基金(10JJ8002);湖南省自然科学基金(10JJ3062)资助

收起

Numerical Simulation of Bullet Oblique Penetration into Aluminum Armor Plate

  • LIU Wenhui ,
  • HU Zhongju ,
  • LIU Deshun ,
  • YE Lingying
Expand
  • 1 College of Electromechanical Engineering, Hunan University of Science and Technology, Hunan Xiangtan 411201, China
    2 School of Materials Science and Engineering, Central South University, Changsha 410083, China

Received date: 2011-04-21

  Online published: 2025-05-29

Fold

摘要

采用ABAQUS软件和Johnson-Cook材料模型,建立了弹丸斜侵彻某型铝合金装甲板的3D有限元模型。同时结合射击实验,研究了枪弹斜侵彻20mm铝合金板的过程,分析了侵彻过程中枪弹的受力特点和方向角的变化。研究结果表明:有限元模拟结果与实验结果的侵彻深度与宏观物理图像比较接近;当枪弹侵入靶板较深时,易发生塑性变形,弯曲的枪弹偏离滑移段的方向穿透靶板,模拟结果为研究穿甲弹斜侵彻金属靶板提供一种有效的分析手段。

关键词： 斜侵彻; 铝合金; 有限元; 方向角

本文引用格式

刘文辉 , 胡忠举 , 刘德顺 , 叶凌英 . 弹丸对铝合金装甲板斜侵彻的数值模拟[J]. 弹箭与制导学报, 2012 , 32(1) : 78 -80,84 . DOI: 10.15892/j.cnki.djzdxb.2012.01.002

Abstract

The experiments of certain armor aluminum alloy plate obliquely penetrated by bullet were carried out, and the penetration model of aluminum alloy plate impacted by bullet was created by using ABAQUS software and Johnson-Cook constitutive equation, and the feature of resistance to bullet and directional change during penetration process were analyzed. Experimental and simulation results show that the penetration model can simulate the shape and depth of crater. The plastic deformation is easy to occur to bullet when the penetration depth is deep, and the bullet will penetrate through the target deviating from the slip-stage direction, which can provide a useful tool to analyze the oblique penetration process of metallic target impacted by bullet.

Key words： oblique penetration; aluminum alloy; FEM; directional angle

[an error occurred while processing this directive]

参考文献

[1]
James JF, Lawrence SK, Joseph RP. Aluminum alloy2519 in military vehicles[J]. Advanced Materials andProcesses, 2002. 160 (9): 43- 46.
[2]
Devincent S M,Devletian J H,Gedeon S A.Weld properties of the newly developed 2519-T87aluminum armor alloy[J].Welding Journal,1988,67(7):33-43.
[3]
朱建方,王伟力,曾亮.某型铝合金抗弹效应数值仿真研究[J].兵工学报,2007,28(4):467-470.
[4]
陈春黾,李伯龙,聂怍仁.穿甲弹侵彻铝合金靶板数值模拟研究[J].科学技术与工程,2010,10(14):3442-3445.
[5]
Warren T L,Kevin L P.Penetration of 6061-T6511aluminum targets by ogive-nosed VAR 4340steel bullets at oblique angles:experiments and simulations[J].International Journal of Impacting Engineering,2001,25(10): 993-1022.
[6]
陈小伟,李维,宋成.细长尖头刚性弹对金属靶板的斜侵彻/穿甲分析[J].爆炸与冲击,2005,25(5):393-399.
[7]
王峰,王肖钧,胡秀章,等.卵形杆弹对铝靶的斜侵彻[J].爆炸与冲击,2005,25(3):265-270.
[8]
何涛,文鹤鸣.可变形弹丸贯穿铝合金靶的数值模拟[J].高压物理学报,2008,22(2):153-159.
[9]
吕中杰,徐钰巍,黄风雷.弹体斜侵彻混凝土过程中的方向偏转[J].兵工学报,2009,30(s2):301-304.
[10]
Jena P K,Jagtap N,Kumar K S.Some experimental studies on angle effect in penetration[J].International Journal of Impacting Engineering,2010,37(5):489-501.
[11]
卢剑锋.冲击载荷作用下材料和结构力学行为有限元模拟[D].北京:清华大学,2003.
[12]
ZHANG Xin-ming,LI Hui-jie,Li Hui-zhong,et al. Dynamic property evaluation of aluminum alloy 2519A by split Hopkinson pressure bar[J].Trans.Nonferrous Met.Soc.China,2008,18(1):1-5.
[13]
Kay G.Failure modeling of titanium 6Al-4Vand aluminum 2024-T3with the Johnson-Cook material model [R].US department of Transportation,Federal Aviation Administration,2003.
[14]
Buyuk M,Kan S,Loikkanen M J.Explicit finite-element analysis of 2024-T3/T351aluminum material under impact loading for airplane engine containment and fragment shielding[J].J.Aerospace Eng.,2009,22(3):287-295.
[15]
Chen X W,Fan S C,Li Q M.Oblique and normal perforation of concrete targets by a rigid bullet[J].International Journal of Impacting Engineering,2004,30(6):617-637.
Options
文章导航

/

〈 〉

[an error occurred while processing this directive]