[an error occurred while processing this directive] [an error occurred while processing this directive] [an error occurred while processing this directive]
[an error occurred while processing this directive]

弹箭与制导学报 >

2012 , Vol. 32 >Issue 4: 139 - 142

DOI: https://doi.org/10.15892/j.cnki.djzdxb.2012.04.055

火箭技术

水射流清理固体推进剂的安全性

  • 郁红陶 ,
  • 张庆明 ,
  • 何远航
展开
  • 1 西安工业大学机电工程学院, 西安 710032
    2 北京理工大学爆炸科学与技术国家重点实验室, 北京 100081

郁红陶(1980-),女,讲师,研究方向:爆炸毁伤与安全。

收稿日期: 2011-10-25

  网络出版日期: 2025-05-29

基金资助

陕西省教育厅专项科研计划项目(2010JK584)

收起

Safety during Waterjet Removing Solid Propellant

  • YU Hongtao ,
  • ZHANG Qingming ,
  • HE Yuanhang
Expand
  • 1 School of Mechatronic Engineering, Xi'an Technological University, Xi'an 710032, China
    2 State Key Laboratory of Explosion Science and Technology, Beijing Institute of Technology, Beijing 100081, China

Received date: 2011-10-25

  Online published: 2025-05-29

Fold

摘要

在高压水射流清理固体推进剂的过程中,安全性是必须考虑的关键性指标。概述了应用高压水射流技术清理固体推进剂的适用性和危险性;理论分析了水射流作用下固体推进剂的点火机制。结果表明,在高压水射流清理固体推进剂时,安全性较常规炸药低,必须预先进行作业系统的安全性评估。

关键词： 水射流; 安全性; 固体推进剂; 点火

本文引用格式

郁红陶 , 张庆明 , 何远航 . 水射流清理固体推进剂的安全性[J]. 弹箭与制导学报, 2012 , 32(4) : 139 -142 . DOI: 10.15892/j.cnki.djzdxb.2012.04.055

Abstract

During the process of removing solid propellant from rocket engineer, safety is the most important index. The practicability and hazards of removal of solid propellant using high-pressure water jet were summarized. The ignition mechanism of solid propellant under water jet impact was analyzed on the theory. The results show that the removal of solid propellant with water jet is more dangerous than ordinary explosive, and safety assessment of the removal system should be conducted first.

Key words： waterjet; safety; solid propellant; ignition

[an error occurred while processing this directive]

参考文献

[1]
承文,柳玉杰. 水射流技术在火箭发动机研制生产中的应用[J]. 化学清洗, 1999, 15(5): 39-45.
[2]
Fossey R D,et al. The new generation waterjet explosives cutting system[C]// The 12th International Symposium on Jet Cutting Technology,1994: 691-698.
[3]
Hashish M,Miller P. Cutting and washout of chemical weapons with high-pressure ammonia jets[C]//The Conference of Jetting Technology, 2000: 81-91.
[4]
Boggs T L,Atwood A I,Mulder E J. Hazards associated with solid propellants[C]//Solid Propellant Chemistry,Combustion and Motor Interior Ballistics. American Institute of Aeronautics and Astronautics, 2000: 221-262.
[5]
张淑君. 固体火箭发动机销毁过程中高燃速推进剂降感技术研究[D]. 西安: 西北工业大学, 2005.
[6]
Tikhomirov R A. High-pressure jet cutting [M]. New York: ASME, 1992: 47-49.
[7]
唐松青,丁宏勋. 丁羟推进剂的高效燃速催化剂[J]. 化学推进剂与高分子材料, 2004,2(1): 8-11.
[8]
何远航,郁红陶,张庆明. 固体推进剂在高压水射流作用下的点火模式[J]. 北京理工大学学报, 2008, 28(2): 97-99.
[9]
郁红陶,何远航,张庆明. 高压水射流冲击固体推进剂的温度效应实验研究[J]. 北京理工大学学报,2008,28(3): 189-191.
Options
文章导航

/

〈 〉

[an error occurred while processing this directive]