[an error occurred while processing this directive] [an error occurred while processing this directive] [an error occurred while processing this directive]
[an error occurred while processing this directive]
导弹与制导技术

助推滑翔飞行器发射诸元计算方法研究

  • 刘君 ,
  • 陈克俊 ,
  • 谢愈 ,
  • 汤国建
展开
  • 国防科学技术大学航天与材料工程学院,长沙 410073

刘君(1979-),男,湖南常宁人,博士研究生,研究方向:飞行器动力学、制导与控制。

收稿日期: 2012-03-28

  网络出版日期: 2025-05-29

The Research on Computing Method for Firing Data of Boost-glide Aerocraft

  • LIU Jun ,
  • CHEN Kejun ,
  • XIE Yu ,
  • TANG Guojian
Expand
  • College of Aerospace and Material Engineering, National University. of Defense Technology, Changsha 410073, China

Received date: 2012-03-28

  Online published: 2025-05-29

摘要

研究助推滑翔飞行器发射诸元计算方法。助推滑翔飞行器的发射诸元计算方程组为欠定方程组,文中基于发射诸元对飞行轨迹的影响分析,提出了助推滑翔飞行器诸元计算策略,将欠定方程组分解为多个恰定方程组,然后运用牛顿迭代模拟打靶法设计了助推滑翔飞行器发射诸元计算算法。最后,实际算例表明文中设计的助推滑翔飞行器发射诸元牛顿迭代模拟打靶算法是可行的。

本文引用格式

刘君 , 陈克俊 , 谢愈 , 汤国建 . 助推滑翔飞行器发射诸元计算方法研究[J]. 弹箭与制导学报, 2012 , 32(6) : 33 -36 . DOI: 10.15892/j.cnki.djzdxb.2012.06.017

Abstract

The computing method for firing data of boost-glide aerocraft was investigated. In the paper, based on analysis of the impact of firing data on aerocraft trajectory, a delamination tactic of computing was proposed. The underdetermined equations of basic firing data of boost-glide aerocraft were divided into several groups of determined equation, then the computing method for basic firing data of boost-glide aerocraft was designed with the Newton iterative algorithm of simulation of target practice. Finally, the feasibility of this approach was proven by an example.

[an error occurred while processing this directive]

参考文献

[1]
陈克俊 载入飞船上升段轨道的 Newton 迭代设计法[J]. 国防科技大学学报, 1992, 14 (2): 66- 71.
[2]
贾沛然, 陈克俊, 何力. 远程火箭弹道学[M]. 长沙: 国防科技大学出版社, 1993: 217- 220.
[3]
郝佳新, 丁振国, 陈克俊. 弹道导弹基本诸元的快速装订算法研究[J]. 计算机仿真, 2008, 25 (4): 25– 29.
[4]
雍恩米, 唐国金. 基于摄动制导的弹道导弹发射诸元的仿真算法[J]. 系统仿真学报, 2005, 17 (5): 1048– 1051.
[5]
王海丽, 陈磊, 胡小平. 弹道基本诸元的快速装订算法研究[J]. 国防科技大学学报, 1999, 21 (2): 5– 8.
[6]
韩东, 谷宏强, 李洪儒. 弹道导弹射程的拟合算法[J]. 军械工程学院学报, 2002, 14 (3): 26- 28.
文章导航

/

[an error occurred while processing this directive]