仿形诱饵体充气展开过程及红外辐射特性

张鹏; 刘荣忠; 郭锐; 张俊

doi:10.15892/j.cnki.djzdxb.2014.01.042

2014 , Vol. 34 >Issue 1: 172 - 175

DOI: https://doi.org/10.15892/j.cnki.djzdxb.2014.01.042

摘要

为了提高坦克和装甲车辆的战场生存概率,提出一种气囊充气式仿形诱饵体。基于LS-DYNA有限元分析软件并采用控制体积法模拟了简化的气囊诱饵体的充气展开过程。获得了气囊充气过程中,气囊外形变化的动态结果,囊内压力和温度的变化规律;分析了气囊的热辐射特性,得到了气囊在不同温度下的光谱辐射出射度及其在3~5µm和8~14µm波段下经大气衰减后的辐射强度变化对比曲线。研究结果对仿形诱饵体的设计具有一定的参考价值。

关键词： 仿形诱饵体; 气囊; 充气过程; 热辐射

本文引用格式

张鹏 , 刘荣忠 , 郭锐 , 张俊 . 仿形诱饵体充气展开过程及红外辐射特性[J]. 弹箭与制导学报, 2014 , 34(1) : 172 -175 . DOI: 10.15892/j.cnki.djzdxb.2014.01.042

Abstract

To improve battlefield survival probability of tanks and armored vehicles, a kind of airbag inflatable profiling decoy was put forward. The simplified airbag-decoy inflation process was simulated by the control volume method based on the finite element analysis software LS-DYNA. The airbag shape, pressure and temperature changes were obtained during the opening process; the heat radiation characteristics of the airbag were analyzed, the spectral radiant existance of the airbag at different temperature and the atmospheric attenuation of radiant intensity contrast curves in 3 to 5 µm and 8 to 14 µm bands were gained. The results would have a certain reference value for the design of profiling decoy.

Key words： profiling decoy; airbag; inflation process; heat radiation

[an error occurred while processing this directive]

参考文献

[1]	范金荣 21世纪前20年精确制导技术发展预测[J]. 现代防御技术, 2003, 31(1): 30-33.
[2]	Bickford HR, Duke PJ, et al. Structure including a partially electrochemically reduced halogenated polymeric containing layer and electrically conductive pattern: US, 5814754 P[J]. 1999-02-23.
[3]	邓春燕, 裴锦华. 全向式着陆缓冲气囊的折叠建模与充气过程仿真[J]. 南京航空航天大学学报, 2009, 41(增刊): 97-102.
[4]	邓文彬, 彭冰亮, 马亮. 基于有限元法的气囊展开模拟对成员安全性的影响[C]//中国汽车安全技术国际研讨会, 2006.
[5]	程涵. 气囊的工作过程研究[D].南京:南京航空航天大学, 2009.
[6]	周涛. 某型气囊展开过程数值模拟及试验研究[D].南京:南京航空航天大学, 2008.
[7]	JT Wang, DJ Nefske. A new CAL3D airbag inflation model, SAE, 880654[R]. 1998.
[8]	万鑫铭, 陈涛, 杨济匡, 等. 一种基于IMM 方法的气囊折叠参数化设计的应用[J]. 计算机仿真, 2006, 23(5): 231-233.
[9]	LSTC. LS-DYNA Keyword User's Manual (Version 971)[M] US: LSTC, 2007.
[10]	张俊, 刘荣忠, 郭锐, 等. 末敏弹减速减旋段表面温度与辐射特性[J]. 红外与激光工程, 2013, 41(2): 311-316.
[11]	吴晗平. 红外辐射大气透过率的工程理论计算方法研究[J]. 光学精密工程, 1998, 6(4): 35-43.

Options

文章导航