[an error occurred while processing this directive] [an error occurred while processing this directive] [an error occurred while processing this directive]
[an error occurred while processing this directive]

弹箭与制导学报 >

2020 , Vol. 40 >Issue 4: 123 - 128

DOI: https://doi.org/10.15892/j.cnki.djzdxb.2020.04.026

聚能装药壳体对环形射流侵彻性能的影响

  • 何降润 1, 2, 3 ,
  • 展婷变 2 ,
  • 付建平 2 ,
  • 卢薇 3 ,
  • 李小军 3 ,
  • 徐风 2 ,
  • 陈智刚 2
展开
  • 1 中北大学机电工程学院, 太原 030051
  • 2 中北大学地下目标毁伤技术国防重点学科实验室, 太原 030051
  • 3 军事科学研究院防化研究院, 北京 102205

何降润(1995-),男,陕西商洛人,硕士研究生,研究方向:弹药工程与毁伤威力。

收稿日期: 2019-10-28

  网络出版日期: 2025-05-30

收起

Research on the Shell to Penetration Performance of Annular Jet

  • HE Jiangrun 1, 2, 3 ,
  • ZHAN Tingbian 2 ,
  • FU Jianping 2 ,
  • LU Wei 3 ,
  • LI Xiaojun 3 ,
  • XU Feng 2 ,
  • CHEN Zhigang 2
Expand
  • 1 School of Mechatronics Engineering, North University of China, Taiyuan 030051, China
  • 2 National Defense Key Laboratory of Underground Damage Technology, North University of China, Taiyuan 030051, China
  • 3 Research Institute of Chemical Defense, Academy of Military Sciences, Beijing 102205, China

Received date: 2019-10-28

  Online published: 2025-05-30

Fold

摘要

开展了聚能装药壳体对环形射流侵彻性能的影响研究,采用LS-DYNA有限元软件进行模拟仿真分析,讨论了不同厚度壳体、不同壳体材料工况下对环形射流威力性能的影响规律。基于爆轰波传播理论,较好解释了壳体厚度、材料对环形射流成型机理的影响规律,并给出了聚能装药内外壳体材料为钨,内外壳体壁厚比值为1.2时,环形射流兼顾开孔与侵深威力。

关键词： 爆轰波理论; 壳体; 环形聚能射流; 威力性能; 数值模拟

本文引用格式

何降润 , 展婷变 , 付建平 , 卢薇 , 李小军 , 徐风 , 陈智刚 . 聚能装药壳体对环形射流侵彻性能的影响[J]. 弹箭与制导学报, 2020 , 40(4) : 123 -128 . DOI: 10.15892/j.cnki.djzdxb.2020.04.026

Abstract

This paper studies the performance of shell thickness to hollow annular shaped energy warheads.The LS-DYNA software is used to study the influence of different thickness and materials to the annular shaped charge jet.Based on detonation wave propagation theory, the influence of the thickness of the cases and material on the forming mechanism of the annular jet is well explained. The inner cases material of the shaped charge is tungsten, while the wall thickness ratio of the inner cases is 1.2, the annular shaped charge jet combines the opening and the invading power.

Key words： detonation wave; cases; annular shaped charge jet; power performance; numerical simulation

[an error occurred while processing this directive]

参考文献

原文顺序 | 文献年度倒序 | 文中引用次数倒序
[1]
LEIDEL D J. A design study of an annular-jet charge for explosivecutter[D]. Philadelphia: Drexel Universitt, 1978.

[2]
CHICK M C, BUSSELL T J, LAM C P, et al. Decelopment of a cookie-cutter explosive formed projectile[C]// IBS.Proceedings of the 17th International Symposium on Ballistics. Orlando: [s.n.], 1998:160.

[3]
KÖNIG P J, MOSTERT F J. The design and performance of annular EFP'ss[C]// Warhead Mechanics. Proceedings of the 19th International Symposium of Ballistics. [S.l.] Warhead Mechanics, 2001:749-754.

[4]
RONDOT F. A computational parametric study on cookie-cutter projectiles[C]// IBS.Proceedings of the 29th International Symposium on Ballistics. Orlando: [s.n.], 2016:601-608.

[5]
张凯, 李晓杰. 聚能线型切割器最佳张开角的理论分析[J]. 爆炸与冲击, 1988, 18(4):316-322.

[6]
王成, 恽寿榕, 黄风雷. W型聚能装药射流形成及侵彻的实验和数值仿真研究[J]. 兵工学报, 2003, 24(4):451-454.

[7]
王成, 宁建国, 卢捷. 环形射流形成及侵彻的数值方法研究[J]. 北京大学学报(自然科学版), 2003, 39(3):316-321.

[8]
李永胜, 王伟力, 姜涛. 一种用于反舰导弹串联战斗部的环形切割器优化设计[J]. 海军航空工程学院学报, 2009, 24(5):481-484.

[9]
吴建宇, 龙源, 纪冲, 等. 炸高对环形聚能射流侵彻特性的研究[J]. 兵器材料科学与工程, 2015, 38(4):68-72.

[10]
童宗保, 王小春, 程剑, 等. 一种M型药型罩形成环形射流的数值模拟研究[J]. 兵器装备工程学报, 2016, 37(3): 143-145.

[11]
徐文龙, 王成, 徐斌. 新型环形聚能射流形成机理研究[J]. 北京理工大学学报, 2018, 38(6):572-578.

[12]
王维占, 赵太勇, 陈智刚, 等. 周向约束对杆式射流成型规律的仿真研究[J]. 弹道学报, 2017, 29(1):79-84.

[13]
付建平, 陈智刚, 侯秀成, 等. 罩顶药高对有隔板聚能装药的影响[J]. 弹箭与制导学报, 2013, 33(6):70-73.

DOI

[14]
刘晓蕾, 曹红松, 张会锁, 等. 弹丸壳体性能对聚能射流影响的数值模拟[J]. 弹箭与制导学报, 2009, 29(2):136-139.

Options
文章导航

/

〈 〉

[an error occurred while processing this directive]