[an error occurred while processing this directive] [an error occurred while processing this directive] [an error occurred while processing this directive]
[an error occurred while processing this directive]

弹箭与制导学报 >

2011 , Vol. 31 >Issue 1: 94 - 96

DOI: https://doi.org/10.15892/j.cnki.djzdxb.2011.01.051

弹药技术

集束穿甲弹气动力计算

  • 张文锐 ,
  • 沈培辉
展开
  • 南京理工大学机械工程学院,南京 210094

张文锐(1984-),男,江苏淮安人,硕士研究生,研究方向:机构动力分

收稿日期: 2010-05-05

  网络出版日期: 2025-05-30

收起

Numerical Analysis on Aerodynamic Characteristics of Cluster Armor-piercing Ammunition

  • ZHANG Wenrui ,
  • SHEN Peihui
Expand
  • School of Mechanical Engineering, Nanjing University of Science and Technology, Nanjing 210094,China

Received date: 2010-05-05

  Online published: 2025-05-30

Fold

摘要

建立了35mm集束穿甲弹的物理模型,使用大型流体计算软件Fluent计算了其在不同马赫数下的阻力系数分布和前腔所受气动力分布规律。为了减小脫壳时外弹托对弹芯的机械干扰需要调整前腔的尺寸,计算了不同前腔尺寸下弹前腔所受的气动力变化,为下一步脱壳分析做好准备。

关键词： 集束穿甲弹; 空气阻力系数; fluent 数值分析; 压力分布; 脱壳穿甲弹

本文引用格式

张文锐 , 沈培辉 . 集束穿甲弹气动力计算[J]. 弹箭与制导学报, 2011 , 31(1) : 94 -96 . DOI: 10.15892/j.cnki.djzdxb.2011.01.051

Abstract

A 35mm cluster armor piercing ammunition physical model was established, and then the drag coefficient and aerodynamic force in different Mach number were calculated using Fluent software. To reduce the mechanical jamming in the discard moment, resizing the front cavity dimensions was needed. Finally, the dynamic characteristics with different front cavity dimensions in discard moment were calculated, and this got preparation for later discarding analysis.

Key words： cluster armor piercing ammunition; drag coefficient; fluent numerical analysis; pressure distribution; sabot armor piercing

[an error occurred while processing this directive]

参考文献

[1]
李向东, 钱建平, 曹兵,等. 弹药概论[M]. 北京: 国防工业出版社, 2004.
[2]
于勇. Fluent 入门与进阶教程[M]. 北京: 北京理工大学出版社, 2008.
[3]
浦发, 芮莜亭. 外弹道学[M]. 北京: 国防工业出版社, 1980.
[4]
沈仲书, 刘亚飞. 弹丸空气动力学[M]. 北京: 国防工业出版社, 1983.
Options
文章导航

/

〈 〉

[an error occurred while processing this directive]