[an error occurred while processing this directive] [an error occurred while processing this directive] [an error occurred while processing this directive]
[an error occurred while processing this directive]
相关技术

基于FPGA 的剔除异部雷达信号方法研究

  • 司伟建 ,
  • 陈龙 ,
  • 肖强
展开
  • 1 哈尔滨工程大学信息与通信工程学院,哈尔滨 150001
    2 91290部队,北京 102100

司伟建(1971-),男,黑龙江哈尔滨人,教授,博士,研究方向:宽带信号的检测、识别与处理。

收稿日期: 2010-05-17

  网络出版日期: 2025-05-30

Another Radar Signal Elimination Based on FPGA

  • SI Weijian ,
  • CHEN Long ,
  • XIAO Qiang
Expand
  • 1 College of Information and Communication Engineering, Harbin Engineering University, Harbin 150001, China
    2 No. 91290 Unit, Beijing 102100, China

Received date: 2010-05-17

  Online published: 2025-05-30

摘要

针对传统的被动雷达导引头信号处理系统在预测宽波门中会存在异部雷达信号的不足,研究了载频、相位差等参数,通过在FPGA中构造的相位累加器与控制逻辑进行实时的预测相位差的变化趋势,给出了相位差的剔除门限和精确的跟踪窄波门,由于采用FPGA设计节省了DSP的资源,减少了系统的复杂性,提高了系统的跟踪精度,在实际的应用中取得了良好效果。

本文引用格式

司伟建 , 陈龙 , 肖强 . 基于FPGA 的剔除异部雷达信号方法研究[J]. 弹箭与制导学报, 2011 , 31(2) : 182 -184 . DOI: 10.15892/j.cnki.djzdxb.2011.02.029

Abstract

Aiming at the deficiency that the forecasting wide gate has another radar signal in the traditional passive radar seeker signal processing system, phase shift and carrier frequency were researched. The trend of the phase shift was well predicted by making a phase accumulator and a logic controller in FPGA, and then the phase threshold and precise narrow gate were proposed. Since the design was based on FPGA, a lot of DSP resources were saved, the system complexity was reduced, the tracing precision was improved, and good effect was achieved in practical application.

[an error occurred while processing this directive]

参考文献

[1]
司锡才, 赵建民. 宽频带反辐射导弹引头技术基础[M]. 哈尔滨: 哈尔滨工程大学出版社, 1996.
[2]
赵国庆. 雷达对抗原理[M]. 西安: 西安电子科技大学出版社, 2002.
[3]
曹来田, 张文旭, 陈涛. 剔除异部雷达信号方法的研究与应用[J]. 应用科技, 2006, 33(7): 44-47.
[4]
张春杰, 唐亮, 司伟建. 导引头剔除异步雷达信号方法研究[J]. 弹箭与制导学报, 2006, 26(2): 974-979.
[5]
童丽, 周海银. 异常数据剔除的一种改进计算方法[J]. 中国空间科学技术, 2001, 21(4): 11-16.
[6]
池庆玺, 司锡才, 卓志敏. 一致性校验在滤除异步信号中的应用[J]. 弹箭与制导学报, 2006, 26(4): 310-312.
文章导航

/

[an error occurred while processing this directive]