[an error occurred while processing this directive] [an error occurred while processing this directive] [an error occurred while processing this directive]
[an error occurred while processing this directive]
弹药技术

空空导弹爆炸冲击波对导弹类目标毁伤数值模拟

  • 严翰新 ,
  • 姜春兰 ,
  • 王超
展开
  • 北京理工大学爆炸科学与技术国家重点实验室,北京 100081

严翰新(1979-),男,江苏常州人,博士研究生,研究方向:常规弹药技术及仿真。

收稿日期: 2010-06-02

  网络出版日期: 2025-05-30

Numerical Simulation for the Damage Effect of Air Target Subjected to Blast Wave

  • YAN Hanxin ,
  • JIANG Chunlan ,
  • WANG Chao
Expand
  • State Key Laboratory of Explosion Science and Technology, Beijing Institute of Technology, Beijing 100081,China

Received date: 2010-06-02

  Online published: 2025-05-30

摘要

为了得到定量装药的爆炸冲击波对目标有效毁伤的临界距离。基于LS/DYNA软件,把导弹类目标简化成一定厚度的圆柱壳体,对定量炸药爆炸冲击波毁伤不同距离处的圆柱壳体进行了三维数值模拟,分析了不同距离处爆炸冲击波对壳体毁伤的作用方式和壳体的响应特征,得出了壳体不同的毁伤程度,得到了一定装药下爆炸冲击波毁伤目标的临界距离,为战斗部设计、毁伤评估及目标防护设计等提供参考。

本文引用格式

严翰新 , 姜春兰 , 王超 . 空空导弹爆炸冲击波对导弹类目标毁伤数值模拟[J]. 弹箭与制导学报, 2011 , 31(2) : 71 -74 . DOI: 10.15892/j.cnki.djzdxb.2011.02.001

Abstract

The non-linear dynamical finite element method was applied to simulate the damage effect of air target subjected to blast wave. The missile target was simplified as a cylindrical shell. Blast wave in air generated and the cylindrical shell damaged by blast wave at different distance was simulated using commercial FEM program LS/DYNA. The methods of the blast wave damaging the cylindrical shell were discussed, and then the dynamic responses and damage degree of cylindrical shell subjected to blast wave were studied. The simulation results provide important reference for warhead design of and damage evaluation.

[an error occurred while processing this directive]

参考文献

[1]
孙韬, 冯顺山. 自由圆柱壳体在侧向非对称脉冲载荷下的塑性破坏[J]. 爆炸与冲击, 1998. 18(2): 103-109.
[2]
李向荣, 王国辉, 俞为民. 导弹弹体空中结构解体毁伤研究[J]. 装甲兵工程学院学报, 2007. 21(3): 18-23.
[3]
陈文, 张庆明. 爆炸冲击波下导弹结构动力分析模型初步研究[J]. 爆炸与冲击, 2009. 29(3): 194-199.
[4]
隋树元, 王树山. 终点效应学[M]. 北京: 国防工业出版社, 2000.
[5]
邓荣兵, 金先龙, 陈向东, 等. 爆炸冲击波作用下桥梁损伤效应的数值仿真[J]. 上海交通大学学报, 2008. 42(11): 1927-1931.
[6]
卢红琴, 刘伟庆. 空中爆炸冲击波的数值模拟研究[J]. 武汉理工大学学报, 2009. 31(19): 105-108.
[7]
时党勇, 李裕春. 基于ANSYS/LS-DYNA8.1进行显式动力分析[M]. 北京: 清华大学出版社, 2005.
[8]
吴宏斌, 陈智刚, 裴思行, 等. 聚焦式定向预制破片战斗部数值模拟研究[J]. 弹箭与制导学报, 2005. 25(3): 497-500.
文章导航

/

[an error occurred while processing this directive]