弹药技术

阵列式陶瓷颗粒破片防护层防弹性能仿真研究

  • 安振涛 ,
  • 甄建伟
展开
  • 解放军军械工程学院,石家庄 050003

安振涛(1963-),男,河北赵县人,教授,博士生导师,研究方向:装备运用环境与防护。

收稿日期: 2010-07-16

  网络出版日期: 2025-05-30

The Numerical Simulation Study of Bulletproof Performance of Array Ceramic Grains Bullet Resistant Material

  • AN Zhentao ,
  • ZHEN Jianwei
Expand
  • Ordnance Engineering College, Shijiazhuang 050003, China

Received date: 2010-07-16

  Online published: 2025-05-30

摘要

设计了一种称为阵列式陶瓷颗粒破片防护层的新型防弹材料,并对材料的防弹性能进行了仿真研究。当破片侵彻防护层的不同位置时,陶瓷颗粒的破碎情况有所不同,可能发生整体破碎或部分破碎。陶瓷颗粒能在极短的时间内使高速破片的速度降到100m/s以内,然后破片速度进入平台下降期,在0.1ms时刻破片的速度均下降到40m/s以下。研究结果可以为阵列式陶瓷颗粒破片防护层的优化设计提供参考。

关键词: 陶瓷; 防弹; 破片; 仿真

本文引用格式

安振涛 , 甄建伟 . 阵列式陶瓷颗粒破片防护层防弹性能仿真研究[J]. 弹箭与制导学报, 2011 , 31(2) : 89 -91,98 . DOI: 10.15892/j.cnki.djzdxb.2011.02.061

Abstract

The array ceramic grains bullet resistant material was designed and the bullet-proof performance of it was researched by simulation. When fragment penetrates the material in different places, the case of ceramic grains breaking is different from others, and the grains could break entirely or partly. In all case, the velocity of fragment can be reduced to 100m/s, and then the velocity falls down slowly, and below 40m/s at 0.1ms. It can offer information to optimize the material.

参考文献

[1]
侯海量, 朱锡, 阚于龙. 陶瓷材料抗冲击响应特性研究进展[J]. 兵工学报, 2008, 29(1): 94-99.
[2]
杨江丽, 宋顺成. 国外陶瓷材料抗侵彻研究进展[J]. 兵器材料科学与工程, 2007, 30(2): 72-74.
[3]
Holmquist T J, Johnson G R. Response of silicon carbide to high velocity impact[J]. J Appl. Phys, 2002, 91(9): 309-316.
[4]
李平, 李大红, 宁建国. 冲击载荷下Al2O3陶瓷的动态响应[J]. 高压物理学报, 2002, 16(1): 22-28.
[5]
张晓晴, 宁建国, 赵隆茂. Al2O3陶瓷动态力学性能的实验研究[J]. 北京理工大学学报, 2004, 24(2): 178-181.
[6]
Rosenberg Z, Yeshurun Y. The relation between ballistic efficiency and compressive strength of ceramic tiles[J]. International Journal of Impact Engineering, 1988, 7(3): 357-362.
文章导航

/