弹药技术

某燃烧弹效能评估模型及影响因素分析

  • 秦仕勇 ,
  • 彭朝辉 ,
  • 李向东
展开
  • 1 南京理工大学机械工程学院,南京 210094
    2 湖南新成机器有限责任公司,湖南株洲 412007

秦仕勇(1986-),男,云南丽江人,硕士研究生,研究方向:目标易损性与高效毁伤。

收稿日期: 2010-08-23

  网络出版日期: 2025-05-30

An Incendiary Bomb Efficiency Evaluation Model and the Influence Factors Analysis

  • QIN Shiyong ,
  • PENG Zhaohui ,
  • LI Xiangdong
Expand
  • 1 School of Mechanical Engineering, NUST, Nanjing 210094, China
    2 Hunan Xincheng Mechinery Co. Led, Hunan Zhuzhou 412007, China

Received date: 2010-08-23

  Online published: 2025-05-30

摘要

为了评估某燃烧弹对目标的毁伤能力,文中通过编程计算的方法,计算了在不同弹药数目、散布均方差、引燃纵火炬散布半径下对油罐车及弹药箱穿燃及引燃概率,并分析了弹药数目、散布均方差、引燃纵火炬散布半径等因素对毁伤效能的影响。计算结果表明:在特定的目标区域和分布下,散布均方差是影响毁伤效能的主要因素;引燃纵火炬散布半径设计为40~60m较佳。

本文引用格式

秦仕勇 , 彭朝辉 , 李向东 . 某燃烧弹效能评估模型及影响因素分析[J]. 弹箭与制导学报, 2011 , 31(3) : 135 -137 . DOI: 10.15892/j.cnki.djzdxb.2011.03.052

Abstract

In order to assess an incendiary bomb damage capability, the pierced and ignited combustion probability on tankers and ammunition boxes was calculated by programming, and the influence efficiency evaluation factors were analyzed: the number of the ammunitions, the spread variance, and the dispersion radius of ignited and cast torch. The results show the major factor of damage efficiency is the spread variance and the dispersion radius of the ignited and cast torch is better designed as 40~60m under the specific target area and distribution.

参考文献

[1]
李向东, 钱建平, 曹兵,等. 弹药概论[M]. 北京: 国防工业出版社, 2004.
[2]
茅金丽. 美空军30毫米穿甲燃烧弹[J]. 现代兵器, 1981(Z1): 118.
[3]
肖跃华. 12.7毫米穿甲爆炸燃烧弹爆炸过程研究[J]. 长沙航空职业技术学院学报, 2004, 4(1): 22-25.
[4]
肖志华. 中国12.7毫米穿甲爆炸燃烧弹[J]. 现代兵器, 1999(4): 10-11.
[5]
潘承洋. 武器系统射击效力分析[M]. 北京: 国防工业出版社, 1985.
文章导航

/