相关技术

一种高精度的二维多波束测向方法

  • 王芳 ,
  • 王志刚 ,
  • 罗景青
展开
  • 1 解放军电子工程学院,合肥 230037
    2 陆军武器装备体系研究国防重点实验室,北京 100012

王芳(1983-),女,安徽安庆人,博士研究生,研究方向:阵列信号处理、空间信息处理。

收稿日期: 2010-10-14

  网络出版日期: 2025-05-30

A Highly Accurate 2-D Multi-beam Direction-finding Method

  • WANG Fang ,
  • WANG Zhigang ,
  • LUO Jingqing
Expand
  • 1 Electronic Engineering Institute of PLA, Hefei 230037, China
    2 Key Laboratory of National Defense Science and Technology on Army Weapon Equipment Systems Research, Beijing 100012, China

Received date: 2010-10-14

  Online published: 2025-05-30

摘要

文中充分利用二维多波束输出的特点,首次将曲面拟合技术应用于二维多波束测向领域,提出一种高精度的二维多波束测向方法,即基于曲面拟合的二维多波束测向算法。文中不仅推导出该算法的数学表达式,还总结出影响该算法测向精度的三个主要因素;最后通过仿真实验分析了三个因素对测向精度的影响。结果表明该方法具有很高的稳健性及较好的测向精度。

本文引用格式

王芳 , 王志刚 , 罗景青 . 一种高精度的二维多波束测向方法[J]. 弹箭与制导学报, 2011 , 31(4) : 236 -239 . DOI: 10.15892/j.cnki.djzdxb.2011.04.038

Abstract

A highly accurate multi-beam direction-finding algorithm was proposed based on curved surface fitting by making the best use of the feature of 2-D multi-beam output. This algorithm applied surface fitting to 2-D multi-beam direction-finding for the first time. The mathematical expression of this algorithm was deduced and three major factors of direction-finding influence were also summarized. At last, the influence of these three factors on direction-finding accuracy was analyzed by simulation experiments. The result of simulation experiment analysis shows that this method has higher steadiness and better direction-finding accuracy.

参考文献

[1]
RO Schmidt. Multiple emitter location and signal parameter estimation[J]. IEEE Trans. Actions on Antenas and Propagation, 1981, AP-34(3): 276-280.
[2]
DR Farrier, DJ Jeffries, R Mardani. Theoretical performance prediction of the MUSIC algorithm[J]. IEE Proc. Part F, 1988, 135(3): 216-224.
[3]
罗景青. 阵列信号处理基本理论与应用[M]. 北京: 解放军出版社, 2007.
[4]
刘孝刚, 吴世龙, 王芳. 二维多波束蜂窝网覆盖方法研究[J]. 装备指挥技术学院, 2008, 19(4): 87-89.
[5]
张曦, 胡春华, 陈五一. 二次曲面拟合与拟合参数不确定度分析[J]. 北京航空航天大学学报, 2006, 32(9): 1091-1095.
[6]
杨国权, 王春, 蔡玉俊. 一种散乱数据曲面拟合算法[J]. 机械设计与制造, 2005(10): 29-30.
文章导航

/