[an error occurred while processing this directive] [an error occurred while processing this directive] [an error occurred while processing this directive]
[an error occurred while processing this directive]

弹箭与制导学报 >

2011 , Vol. 31 >Issue 4: 99 - 101,132

DOI: https://doi.org/10.15892/j.cnki.djzdxb.2011.04.056

弹药技术

制造误差对金属射流威力影响的仿真研究

  • 贾伟 ,
  • 吴国东 ,
  • 王志军 ,
  • 郭支明
展开
  • 1 中北大学机电工程学院,太原 030051
    2 66352部队,北京 101500

贾伟(1984-),男,内蒙古锡林浩特人,硕士研究生,研究方向:弹箭仿真技术。

收稿日期: 2010-10-25

  网络出版日期: 2025-05-30

收起

Strength Simulation Study of Metallic Jet Effected by Technical Errors

  • JIA Wei ,
  • WU Guodong ,
  • WANG Zhijun ,
  • GUO Zhiming
Expand
  • 1 School of Mechatronics Engineering, North University of China, Taiyuan 030051, China
    2 No. 66352 Unit, Beijing 101500, China

Received date: 2010-10-25

  Online published: 2025-05-30

Fold

摘要

为了研究制造误差对金属射流威力的影响,从起爆点偏心、药型罩内外表面不同轴度、药型罩轴线与装药轴线不同轴度三个方面,运用LS-DYNA程序对射流成型及侵彻靶板过程进行数值模拟,分析三种误差对射流侵彻深度的影响。研究结果表明:三种误差均可造成药型罩不对称压垮,降低射流侵彻能力。

关键词： 金属射流; 侵彻深度; 数值模拟

本文引用格式

贾伟 , 吴国东 , 王志军 , 郭支明 . 制造误差对金属射流威力影响的仿真研究[J]. 弹箭与制导学报, 2011 , 31(4) : 99 -101,132 . DOI: 10.15892/j.cnki.djzdxb.2011.04.056

Abstract

In order to study the effects of technical errors on metallic jet, the process of penetrating target and jet formation has been numerically simulated with LS-DYNA dynamic finite element procedure. Three types of technical defects have been analyzed within the scope of the work as different axes between charge and liner, different axes between inside and outside of liner and off-center initiation of the explosive charge. The results show that: All three types of technical errors will cause the liner collapsed asymmetrically and reduce its penetrating capability.

Key words： metallic jet; penetration depth; numerical simulation

[an error occurred while processing this directive]

参考文献

[1]
李裕春, 时党勇, 赵远. ANSYS 11.0/LS-DYNA基础理论与工程实践[M]. 北京: 中国水利水电出版社, 2008.
[2]
石健, 王宝兴, 郭红军,等. 装药与药型罩不对称因素对射孔弹性能的影响[J]. 测井技术, 2007, 31(5): 500-502.
[3]
曹兵, 陈惠武, 高森烈. 减小破甲弹穿深跳动量的工艺研究[J]. 南京理工大学学报, 1997, 21(6): 489-492.
[4]
O. Ayisit. The influence of asymmetries in shaped charge performance[J]. International Journal of Impact Engineering, 2008, 35(4): 1399-1404.
[5]
由强. 掘进武器系统的侵彻战斗部研究[D]. 沈阳: 沈阳理工大学, 2009.
Options
文章导航

/

〈 〉

[an error occurred while processing this directive]