[an error occurred while processing this directive] [an error occurred while processing this directive] [an error occurred while processing this directive]
[an error occurred while processing this directive]

弹箭与制导学报 >

2011 , Vol. 31 >Issue 5: 39 - 43

DOI: https://doi.org/10.15892/j.cnki.djzdxb.2011.05.037

导弹与制导技术

基于单轴旋转的捷联系统误差特性分析

  • 孙伟 ,
  • 孙枫
展开

孙伟(1984-),男,黑龙江人,讲师,博士,研究方向:惯性导航。

收稿日期: 2010-12-05

  网络出版日期: 2025-05-30

基金资助

国家自然科学基金(60834005;60775001)

收起

Error Analysis of SINS Based on Single-axial Rotation

  • SUN Wei ,
  • SUN Feng
Expand

Received date: 2010-12-05

  Online published: 2025-05-30

Fold

摘要

针对旋转捷联惯导系统误差特性,分析转台转轴与当地垂线偏离及尺寸效应对系统导航精度的影响。以单轴旋转为例,论证了旋转调制补偿部分惯性器件偏差的基本原理。推导了惯性测量单元旋转时,转台转轴与当地垂线偏离引起的速度误差表达式;通过引入旋转角速度误差,分析尺寸效应对系统导航精度的影响。在理论分析基础上进行仿真,结果表明转台转轴与当地垂线偏离时系统产生较大定位误差,转速不平稳是导致尺寸效应加剧的主要因素。

关键词： 捷联惯性导航系统; 单轴旋转; 台面倾斜; 尺寸效应; 误差分析

本文引用格式

孙伟 , 孙枫 . 基于单轴旋转的捷联系统误差特性分析[J]. 弹箭与制导学报, 2011 , 31(5) : 39 -43 . DOI: 10.15892/j.cnki.djzdxb.2011.05.037

Abstract

The influence of rotation axis offsetting the local vertical and the dimensional effect errors on navigation accuracy in rotary strapdown inertial navigation system was studied. Taking the single-axial rotation as an example, the principle of auto-compensating the inertial elements drift in some inertial sensors was analyzed. The influence of rotation axis offset local vertical on navigation accuracy during the inertial measurement unit (IMU) rotating procedure was analyzed, and the influence of dimensional effect errors on navigation accuracy was also studied on the condition of the IMU rough running. The simulation was presented based on the theoretical analysis, and the results show that the positioning error is caused with the rotation axis offset local vertical, the IMU rough running is the most serious factor leading to the dimensional effect errors.

Key words： strapdown inertial navigation system; single-axial rotation; slantwise turntable; dimensional effect; error analysis

[an error occurred while processing this directive]

参考文献

[1]
于旭东, 王宇, 张鹏飞,等. 单轴旋转对惯性导航系统误差特性的影响[J]. 中国惯性技术学报, 2008, 16(6): 643-648.
[2]
Ishibashi S, Tsukioka S, Sawa T. The rotation control system to improve the accuracy of an inertial navigation system installed in an autonomous underwater vehicle[C]// Workshop on Scientific Use of Submarine Cables and Related Technologies 2007, 2007: 495-498.
[3]
Morrow R B, Heckman D W. High precision IFOG insertion into the strategic submarine navigation system[C]// IEEE 1998 Position Location and Navigation Symposium, 1998: 332-338.
[4]
Levinson E, Willcocks M. The next generation marine inertial navigation is here now[C]// IEEE Position Location and Navigation Symposium, 1994: 121-127.
[5]
孙枫, 孙伟. 旋转捷联惯导系统精对准技术研究[J]. 系统工程与电子技术, 2010, 32(3): 630-633.
[6]
黄昆, 王戈, 杨功流,等. 旋转式捷联惯导系统的误差特性分析[C]// 中国惯性技术学会第六届学术年会论文集, 2008: 56-61.
[7]
袁保仑, 饶谷音. 光学陀螺旋转惯导系统原理探讨[J]. 国防科技大学学报, 2006, 28(6): 76-80.
[8]
孙枫, 孙伟. 旋转自动补偿捷联惯导系统技术研究[J]. 系统工程与电子技术, 2010, 32(1): 122-125.
[9]
孙枫, 孙伟, 郭真. 基于IMU旋转的捷联惯导系统自补偿方法[J]. 仪器仪表学报, 2009, 30(12): 2511-2517.
[10]
孙枫, 孙伟. 摇摆基座下旋转捷联系统粗对准技术研究[J]. 仪器仪表学报, 2010, 31(4): 929-936.
[11]
刘峰, 徐策, 尚克军,等. 水平初始对准误差对旋转 IMU导航系统的精度影响[J]. 中国惯性技术学报, 2008, 16(6): 649-656.
[12]
张树侠, 孙静. 捷联式惯性导航系统[M]. 北京: 国防工业出版社, 1992.
Options
文章导航

/

〈 〉

[an error occurred while processing this directive]