[an error occurred while processing this directive] [an error occurred while processing this directive] [an error occurred while processing this directive]
[an error occurred while processing this directive]

弹箭与制导学报 >

2011 , Vol. 31 >Issue 5: 96 - 98

DOI: https://doi.org/10.15892/j.cnki.djzdxb.2011.05.041

弹药技术

引信高过载步进应力试验的冲击次数折算*

  • 尹芳 ,
  • 张亚 ,
  • 何荣华 ,
  • 邓天士 ,
  • 陈兆刚
展开
  • 1 中北大学机电工程学院,太原 030051
    2 63636部队,甘肃酒泉 732750
    3 63602部队,甘肃酒泉 732750

尹芳(1985-),女,山东临沂人,硕士研究生,研究方向:机电系统控制技术。

收稿日期: 2011-01-14

  网络出版日期: 2025-05-30

收起

Impact Times Conversion of High Overload Step-stress Testing for Fuze

  • YIN Fang ,
  • ZHANG Ya ,
  • HE Ronghua ,
  • DENG Tianshi ,
  • CHEN Zhaogang
Expand
  • 1 School of Mechatronics Engineering, North University of China, Taiyuan 030051, China
    2 No. 63636 Unit, Gansu Jiuquan 732750, China
    3 No. 63602 Unit, Gansu Jiuquan 732750, China

Received date: 2011-01-14

  Online published: 2025-05-30

Fold

摘要

介绍了引信高过载机械冲击步进应力试验的基本原理,针对试验的机械冲击次数折算问题进行讨论。首先建立了数据折算的分析方法,然后引用统计试验中的Weibull分布场合分析方法对工程试验范畴的高过载步进应力试验的机械冲击次数折算进行了初步探讨,最后利用实验数据验证了该方法的可行性。

关键词： 数据折算; 引信; 高过载; 步进应力试验; 冲击

本文引用格式

尹芳 , 张亚 , 何荣华 , 邓天士 , 陈兆刚 . 引信高过载步进应力试验的冲击次数折算*[J]. 弹箭与制导学报, 2011 , 31(5) : 96 -98 . DOI: 10.15892/j.cnki.djzdxb.2011.05.041

Abstract

The basic principle of high overload step-stress testing for fuze was introduced, and the impact times conversion of high overload mechanical impact step-stress testing for fuze was discussed. Analysis method of data conversion was brought forward, then impact times conversion of high overload mechanical impact step-stress testing in category of engineering test was preliminarily studied through quoting statistical testing analysis method under Weibull distribution. Finally, the feasibility of this method was illustrated by experimental data.

Key words： data conversion; fuze; high overload; step-stress testing; impact

[an error occurred while processing this directive]

参考文献

[1]
温熙森, 陈循, 张春华,等. 可靠性强化试验理论与应用[M]. 北京: 科学出版社, 2007: 1-13.
[2]
何荣华, 张亚, 李波,等. 军用电子元件的可靠性强化试验方案研究[J]. 科学技术与工程, 2009, 9(18): 5460-5464.
[3]
胡恩平, 罗兴柏, 刘国庆. 采用线性累积模型的变换形式分析步加试验[J]. 机械设计与制造, 2001(1): 46-47.
[4]
牛美玲. 步进应力加速寿命试验的统计分析[D]. 上海: 上海师范大学, 2000.
[5]
王玲玲. 步进应力加速寿命试验数据处理及其应用[J]. 数理统计与管理, 1984(3): 20-25.
Options
文章导航

/

〈 〉

[an error occurred while processing this directive]