[an error occurred while processing this directive] [an error occurred while processing this directive] [an error occurred while processing this directive]
[an error occurred while processing this directive]

弹箭与制导学报 >

2018 , Vol. 38 >Issue 3: 111 - 112,118

DOI: https://doi.org/10.15892/j.cnki.djzdxb.2018.03.027

导弹与制导技术

高精度机电式自动加载技术的研究和应用

  • 纪涛 ,
  • 李小刚 ,
  • 赵长辉 ,
  • 徐明 ,
  • 周航
展开
  • 中国航空工业空气动力研究院,沈阳 110034

纪涛(1985-),男,辽宁锦州人,工程师,研究方向:测控技术。

收稿日期: 2017-09-01

  网络出版日期: 2025-05-30

收起

Research and Application of High Precision Mechanical and Electrical Auto-loading Method

  • JI Tao ,
  • LI Xiaogang ,
  • ZHAO Changhui ,
  • XU Ming ,
  • ZHOU Hang
Expand
  • AVIC Aerodynamics Research Institute, Shenyang 110034, China

Received date: 2017-09-01

  Online published: 2025-05-30

Fold

摘要

在导弹及飞机型号的测力风洞试验中,天平是必不可少的关键设备,天平的标定是通过天平校准系统来完成的。针对天平校准系统砝码加载方式存在的问题,开展了机电式自动加载技术研究,文中比较详细的介绍了高精度机电式自动加载的技术方案和可行性验证试验。并且该项技术在BACS5000天平校准系统研制中得以应用,证明可推广应用。

关键词： 测力风洞试验; 天平; 天平校准系统; 机电式自动加载

本文引用格式

纪涛 , 李小刚 , 赵长辉 , 徐明 , 周航 . 高精度机电式自动加载技术的研究和应用[J]. 弹箭与制导学报, 2018 , 38(3) : 111 -112,118 . DOI: 10.15892/j.cnki.djzdxb.2018.03.027

Abstract

Wind tunnel balance is an important device in wind tunnel test. The calibration of balance is completed by balance calibration system. Aiming at problem of weight loading method in balance calibration system, the research of electromechanical auto-loading technique was developed. This paper introduced the research process and feasibility test of high precision electromechanical auto-loading technique in detail. Finally, this new technique was applied in BACS5000 balance calibration system successfully and it also proved that this technique can be applied more widely.

Key words： wind tunnel test; balance; balance calibration system; mechanical and electrical auto-loading

[an error occurred while processing this directive]

参考文献

[1]
王朝安 一个全自动的风洞天平校准系统[J]. 流体力学实验与测量, 1998, 121: 92-95.
[2]
贺德馨 风洞天平[M]. 北京: 国防工业出版社, 2001,
[3]
刘永昌 浅谈应变天平校准方法的比较[J]. 气动实验与测量控制, 19882: 17-20.
[4]
KAWAMURA T, NAGAYA H, HASHIOKA T, et al Development of an automatic balance caliration machine for JAXAwind tunnel[C] // Proceedings of the 8th InternationalSymposium on Strain-Gauge Balnces. Lucerne, Switzerland, 2012: 1-40.
[5]
沈德和, 李云壁 正交试验设计及应用:第四讲线性回归和正交回归设计[J]. 机械制造, 198412: 39-42.
[6]
欧阳万 风洞天平校准的因子法、正交法及单元校[J]. 气动实验与测量控制, 1991, 51: 66-71.
Options
文章导航

/

〈 〉

[an error occurred while processing this directive]