[an error occurred while processing this directive] [an error occurred while processing this directive] [an error occurred while processing this directive]
[an error occurred while processing this directive]

弹箭与制导学报 >

2021 , Vol. 41 >Issue 5: 46 - 52

DOI: https://doi.org/10.15892/j.cnki.djzdxb.2021.05.010

基于ADAMS与AMESim的飞行器发射动力学仿真

  • 赵君伟 ,
  • 张家骏 ,
  • 张程 ,
  • 司世才 ,
  • 裘群海
展开
  • 中国运载火箭技术研究院,北京 100076

赵君伟(1991—),男,河北承德人,工程师,研究方向:机电液一体化设计.

收稿日期: 2020-10-10

  网络出版日期: 2025-05-30

收起

Simulation of Launch Dynamics of Aircraft Based on ADAMS and AMESim

  • ZHAO Junwei ,
  • ZHANG Jiajun ,
  • ZHANG Cheng ,
  • SI Shicai ,
  • QIU Qunhai
Expand
  • China Academy of Launch Vehicle Technology, Beijing 100076, China

Received date: 2020-10-10

  Online published: 2025-05-30

Fold

摘要

基于ADAMS与AMESim联合仿真技术,通过在ADAMS软件中建立发射车和飞行器多体动力学模型,在AMESim中建立发射车液压子系统模型,采用联合仿真方式,对某型飞行器发射出箱过程进行了动态仿真分析。经分析确认,飞行器发射出箱后,姿态角及角速度均正常,满足姿态控制系统起控条件。

关键词： 联合仿真; 飞行器; 发射; 动力学

本文引用格式

赵君伟 , 张家骏 , 张程 , 司世才 , 裘群海 . 基于ADAMS与AMESim的飞行器发射动力学仿真[J]. 弹箭与制导学报, 2021 , 41(5) : 46 -52 . DOI: 10.15892/j.cnki.djzdxb.2021.05.010

Abstract

Based on the joint simulation technology of ADAMS and AMESim, this paper establishes the launch vehicle and aircraft multibody dynamics model in ADAMS software, establishes the launch vehicle hydraulic subsystem model in AMESim, and adopts joint simulation to carry out the dynamic simulation analysis of the launch process of a certain aircraft. After analysis, it is confirmed that the attitude angle and angular velocity of the aircraft are normal after the vehicle is launched out of the box, which meets the control conditions of the attitude control system.

Key words： co-simulation; aircraft; launch; dynamics

[an error occurred while processing this directive]

参考文献

[1]
廖莎莎 , 吴成 . 机载导弹发射动力学建模与虚拟样机仿真 [J]. 北京理工大学学报 , 2011,31 (9): 1013 - 1017 .
[2]
张久星 , 张登成 , 朱和铨 , 等 . 基于ADAMS的内装式空射运载火箭分离过程动力学分析 [J]. 弹箭与制导学报 , 2011,31 (2): 153 - 156 .
[3]
杨华保 , 马新 , 李军鹏 , 等 . 空中发射及其关键技术 [J]. 火力与指挥控制 , 2008,33 (9): 15 - 17 .
[4]
赵晓影 . 多领域联合仿真技术的分析研究 [J]. 机械制造 , 2013,51 (591): 70 - 72 .
[5]
汤涤军 , 林程 , 舒进 . 基于ADAMS的机电液一体化仿真研究 [J]. 计算机仿真 , 2004,21 (10): 119 - 121 .
[6]
李剑峰 , 汪建兵 , 林建军 , 等 . 机电系统联合仿真与集成优化案例解析 [M]. 北京 : 电子工业出版社 , 2010,18 . 37 .
[7]
卢宁 . 钢坯闪光焊接系统虚拟试验 [J]. 焊接学报 , 2014,35 (5): 83 - 87 .
Options
文章导航

/

〈 〉

[an error occurred while processing this directive]