[an error occurred while processing this directive] [an error occurred while processing this directive] [an error occurred while processing this directive]
[an error occurred while processing this directive]
弹药技术

基于介质变化的侵彻弹药实时测速系统设计

  • 孙俊伟 ,
  • 张亚 ,
  • 李俊锋
展开
  • 中北大学机电工程学院,太原 030051

孙俊伟(1979-),男,山西翼城人,讲师,硕士,研究方向:武器系统信息与控制。

收稿日期: 2013-06-05

  网络出版日期: 2025-05-30

The System Design of Penetrating Ammunition's Real-time Velocity-measuring System on the Basis of Media Change

  • SUN Junwei ,
  • ZHANG Ya ,
  • LI Junfeng
Expand
  • School of Mechatronics Engineering, North University of China, Taiyuan 030051, China

Received date: 2013-06-05

  Online published: 2025-05-30

摘要

获得弹药在侵彻过程中的实时速度对判断弹药所处的位置和炸点控制有重要的意义。文中提出了一种以双压电传感器和定时器为主要器件的弹丸测速装置原理。根据弹药在穿越不同介质时受到的压力变化量不同,结合相关原理,确定弹药在侵彻不同介质时的速度,改善了之前的测速原理。仿真验证表明,系统能够稳定测得侵彻速度。

本文引用格式

孙俊伟 , 张亚 , 李俊锋 . 基于介质变化的侵彻弹药实时测速系统设计[J]. 弹箭与制导学报, 2014 , 34(2) : 55 -58 . DOI: 10.15892/j.cnki.djzdxb.2014.02.019

Abstract

Acquisition of real-time speed during ammunition penetration has great significance on ammunition position judgments and burst point control. In this paper, the principle of a velocity measurement device with double piezoelectric sensors and timer as main components was presented. According to different pressure variation when the ammunition is passin g through different media, with reference to other relevant principles, the penetrating speed when the ammunition is passin g through different media was determined, by which the previous velocity measurement principle was improved. Verified by simulation, the system is proved to be reliably useful.

[an error occurred while processing this directive]

参考文献

[1]
侯超, 刘勇涛, 杨旭. 侵彻硬目标武器及其智能引信关键技术研究[J]. 航空兵器, 2012 (4): 45-48.
[2]
李蓉, 康兴国. 打击深层硬目标的引信计行程起爆控制技术[J]. 探测与控制学报, 2006 28(6): 33-36.
[3]
李蓉, 陈侃, 康兴国, 等. 硬目标侵彻引信炸点控制方法综述[J]. 探测与控制学报, 2010 32(6): 1-4.
[4]
李蓉, 康兴国. 一种实时计算硬目标侵彻着速的方法[J]. 探测与控制学报, 2004 26(2): 32-35.
[5]
Monty W Bai, Gerald James Moore, Ralph Eugene Foresman. Variable target transition detection capability and method therefore, US, 6378435B1 [P]. [2002-04-30].
文章导航

/

[an error occurred while processing this directive]