[an error occurred while processing this directive] [an error occurred while processing this directive] [an error occurred while processing this directive]
[an error occurred while processing this directive]

爆炸反应装甲防攻顶技术研究

  • 杨青山 1 ,
  • 张建仁 2 ,
  • 刘学柱 2 ,
  • 冯雄波 2
展开
  • 1 太原地区第三军事代表室,山西 太原 030012
  • 2 山西江阳化工有限公司军品研究所,山西 太原 030041

杨青山(1973—),男,高级工程师,研究方向:弹药和战斗部结构设计、分析与质量监督。

收稿日期: 2022-05-26

  网络出版日期: 2025-02-24

Research on Anti-attack Roof Technology of Explosive Reactive Armor

  • YANG Qingshan 1 ,
  • ZHANG Jianren 2 ,
  • LIU Xuezhu 2 ,
  • FENG Xiongbo 2
Expand
  • 1 The Third Military Representative Office in Taiyuan Region,Taiyuan 030012, Shanxi, China
  • 2 The Military Product Research Institute of Shanxi Jiangyang Chemical Co., Ltd.,Taiyuan 030041, Shanxi, China

Received date: 2022-05-26

  Online published: 2025-02-24

摘要

为了适应战争形式的演变,坦克和装甲车辆顶部防护的有效性一直在提升。首先对爆炸反应装甲(explosive reactive armor, ERA)干扰破甲弹机理进行理论计算研究,然后设计出一种高效的组合爆炸反应装甲,最后进行了试验验证。

结果表明:

该反应装甲能够有效干扰100型标准破甲弹的侵彻。

本文引用格式

杨青山 , 张建仁 , 刘学柱 , 冯雄波 . 爆炸反应装甲防攻顶技术研究[J]. 弹箭与制导学报, 2023 , 43(2) : 38 -42 . DOI: 10.15892/j.cnki.djzdxb.2023.02.007

Abstract

In order to adapt to the evolution of war forms, the effectiveness of tank and armored vehicles roof protection was improving. Based on the theoretical calculation and research on the mechanism of explosive reactive armor(ERA)interfering with high explosive anti-tank(HEAT), a kind of efficient combined explosive reactive armor was designed. The test shows that the ERA can effectively interfere with penetration of type 100 standard HEAT. The successful test of the ERA is of a certain guiding significance for the future research on the roof protection of tank armored vehicles.

[an error occurred while processing this directive]
[1]
徐龙堂, 付昭旺, 常颖, 等. 装甲车辆顶部防护需求及对策分析[J]. 兵器装备工程学报, 2018, 39(11): 16-20

XU L T, FU Z W, CHANG Y, et al. Analysis on protection demand and countermeasures for the top of armored vehice[J]. Joural of Ordnance Equipment Engineering, 2018, 39(11): 16-20.

[2]
韩宏伟, 王建波, 孙素杰. 反应装甲技术在下一代坦克装甲车辆研发中的应用前景[C]// 装甲车辆防护研讨会论文集. [出版地不详: 出版者不祥], 2010: 113-118.

HAN H W, WANG J B, SUN S J. Application prospect of reactive armor technology in next generation tank armored vehicle development[C]// Proceedings of the Symposium on Armoured Vehicle Protection. [S.l.: s.n.], 2010: 113-118.

[3]
张卫东. 以色列装甲车辆防护技术[J]. 国外坦克, 2006(10): 35-38

ZHANG W D. Israeli armored vehicle protection technology[J]. Foreign Tank, 2006(10): 35-38.

[4]
曹凌宇, 罗兴柏, 刘国庆, 等. 国外新型装甲防护技术综述[J]. 飞航导弹, 2018(9): 74-78

CAO L Y, LUO X B, LIU G Q, et al. Review of new armor protection technologies abroad[J]. Aerodynamic Missile Journal, 2018(9): 74-78.

[5]
王凤英. 装甲防护技术的发展[J]. 测试技术学报, 2002, 16(2): 144-147.

WANG F Y. The development of armor defence[J]. Joural of Testing Technology, 2002, 16(2): 144-147.

[6]
MAYSELESS M, ERLICH Y FALCOVITZ Y, et al. Interaction of shaped-charge jet with reactive armor[C]// IBS. Proceedings of the 8th lnternational Symposium on Ballistic. Nevada: ISB, 1984: 5315-5320.

[7]
HELD M, MAYSELESS M, ROTOTAEV E. Explosive reactive armor[C]// IBS. Proceedings of the 17th lnternational Symposium on Ballistic. Nevada: ISB, 1998: 33-46.

[8]
吴成, 蒋建伟, 冯顺山. 爆炸反应装甲运动规律的数值仿真及研究[J]. 兵工学报, 2002, 23(1): 35-38.

WU C, JIANG J W, FENG S S. A study on the moving features of explosive reactive armor by numerical simulation and experiments[J]. Acta Armamentarii, 2002, 23(1): 35-38.

[9]
HELD M. Stopping power of explosive reactive armors against different shaped charge diameters or at different a ngles[J]. Propellants, Explosive, Pyrotechnics, 2001, 26: 97-104.

[10]
黄正祥, 李刚, 陈惠武. 双层反应装甲作用场参数数值模拟与实验研究[J]. 弹道学报, 2005, 17(4): 40-43.

HUANG Z X, LI G, CHEN H W. Numerical simulation and experimental study on double explosive reactive armor[J]. Joural of Ballistics, 2005, 17(4): 40-43.

[11]
刘宏伟, 罗军洪, 谢卫红. 双层反应装甲干扰射流影响因素分析[J]. 军械工程学院学报, 2014, 6(6): 22-25.

LIU H W, LUO J H, XIE W H. Analysis on the influence factors of double explosive reactive armor interfering jet[J]. Joural of Ordnance Engineering College, 2014, 26(6): 22-25.

[12]
曹贺全, 张广明, 孙素杰, 等. 装甲车辆防护技术研究现状与发展[J]. 兵工学报, 2012, 33(12): 1549-1554

CAO H Q, ZHANG G M, SUN S J, et al. Status and development of protection technologies of armored vehicles[J]. Acta Armamentarii, 2012, 33(12): 1549-1554.

[13]
曹贺全, 孙葆森, 徐龙堂, 等. 装甲防护技术研究[M]. 北京: 北京理工大学出版社, 2019, 277, 279.

CAO H Q, SUN B S, XU L T, et al. Research on armor protection technology[M]. Beijing: Beijing Institute of Technology Press, 2019: 277, 279.

[14]
张志强, 赵宝荣, 张锐生, 等. 装甲防护技术基础[M]. 北京: 兵器工业出版社, 2000.

ZHANG Z Q, ZHAO B R, ZHANG R S, et al. Basis of armor protection technology[M]. Beijing: Ordnance Industry Press, 2000.

文章导航

/

[an error occurred while processing this directive]