弹药技术

攻角对两级穿爆战斗部侵彻水面舰艇目标性能影响仿真

  • 黄雪峰 ,
  • 王伟力 ,
  • 宋浦 ,
  • 姜颖资 ,
  • 傅磊
展开
  • 1 海军航空工程学院,山东烟台 264001
    2 西安近代化学研究所,西安 710065

黄雪峰(1983-),男,四川自贡人,博士研究生,研究方向:目标与终点毁伤效应。

收稿日期: 2013-10-25

  网络出版日期: 2025-05-30

Simulation on Influence of Two-stage Piercing-blasting Warhead Penetrating Surface Vessel Target with Attack Angle

  • HUANG Xuefeng ,
  • WANG Weili ,
  • SONG Pu ,
  • JIANG Yingzi ,
  • FU Lei
Expand
  • 1 Naval Aeronautical and Astronautical University, Shandong Yantai 264001, China
    2 Xi'an Modern Chemistry Research Institute, Xi'an 710065, China

Received date: 2013-10-25

  Online published: 2025-05-30

摘要

为了研究攻角对两级穿爆战斗部侵彻水面舰艇目标性能的影响,利用LS-DYNA有限元软件进行了两级穿爆战斗部侵彻双层等效靶板的数值模拟,分析攻角对前、后级战斗部剩余速度、壳体强度、速度偏角以及前、后级战斗部之间行程差的影响。小攻角对于前级战斗部侵彻性能的影响不大,对后级战斗部的强度有较大影响;攻角增大,后级战斗部的变形和破坏加剧;攻角有利于前、后级战斗部之间行程差的增大。研究结果为新型战斗部的设计提供了参考。

本文引用格式

黄雪峰 , 王伟力 , 宋浦 , 姜颖资 , 傅磊 . 攻角对两级穿爆战斗部侵彻水面舰艇目标性能影响仿真[J]. 弹箭与制导学报, 2014 , 34(4) : 85 -88,92 . DOI: 10.15892/j.cnki.djzdxb.2014.04.031

Abstract

In order to study the influence of the Piercing-Blasting warhead penetrating surface vessel target with attack angle, used finite software LS-DYNA to simulate the process of the two-stage piercing-blasting warhead attacking double equivalence target, analyzed the influence of residual velocity, shell strength, speed declination and stroke different of the two stage warhead at attack angles. The results show that when the attack angle increase, it has little affect to the penetration of pre-stage, but the last stage warhead facing austere influence; When attack angle increase, the deformation of last stage warhead aggravate; The attack angle is beneficial to increase the stroke different between the pre-stage and last stage warhead. The results can provide reference for new warhead design.

参考文献

[1]
李杰, 刘卫新. 强敌航母战斗群的作战运用[J]. 外国军事学术, 2000 (8): 25-28.
[2]
朱占飞, 石全, 王广彦, 等. 斜侵彻时攻角对弹道影响的数值研究[J]. 弹箭与制导学报, 2012, 32(4): 115– 118.
[3]
李长顺, 刘天生. 有攻角伸出式侵彻体侵彻有限厚靶板数值模拟[J]. 弹箭与制导学报, 2009, 29(3): 126– 132.
[4]
张林, 张祖根, 秦晓云, 等. D6A、921 和45 钢的动态破坏与低压冲击特性[J]. 高压物理学报, 2003, 17(4): 305-310.
[5]
李海峰, 赵晓平, 何铁宁. 炸药脆性材料切削加工数值模拟研究[J]. 含能材料, 2004, 12(S2): 555-560.
[6]
韩小平, 张元冲. Comp. B复合炸药动态力学性能和塑性流动本构关系的研究[J]. 力学学报, 1996, 28(3): 319-327.
文章导航

/