导弹与制导技术

惯性激发式含能毁伤元起爆特性研究

  • 林辉 ,
  • 夏广东 ,
  • 余万千 ,
  • 刘吉安
展开
  • 1 西安现代控制技术研究所, 西安 710065
    2 陆军边海防学院, 西安 710108

林辉(1965-),男,福建泉州人,高级工程师,研究方向:弹药总体技术。

收稿日期: 2018-04-25

  网络出版日期: 2025-05-30

Study on Initiation Characteristics of Inertia Excitation EnergeticKill Element

  • LIN Hui ,
  • XIA Guangdong ,
  • YU Wanqian ,
  • LIU Ji'an
Expand
  • 1 Xi'an Modern Control Technology Research Institute, Xi'an 710065, China
    2 Army Academy of Border and Coastal Defence, Xi'an 710108, China

Received date: 2018-04-25

  Online published: 2025-05-30

摘要

为提高防空反导战斗部的毁伤效能,设计了一种惯性激发式含能子弹毁伤元。针对两种不同惯性体结构,进行了弹丸弹道发射撞击起爆试验,获得了两种结构弹丸的起爆时间。实验结果表明,相对于平头惯性体结构,双锥形的结构更有利于弹丸的有效激发。双锥形惯性体弹丸能够完成靶后释能的毁伤目标。分析了着靶速度对起爆特性的影响规律,为后续低速易起爆机理研究积累了数据。

本文引用格式

林辉 , 夏广东 , 余万千 , 刘吉安 . 惯性激发式含能毁伤元起爆特性研究[J]. 弹箭与制导学报, 2018 , 38(3) : 139 -142 . DOI: 10.15892/j.cnki.djzdxb.2018.03.034

Abstract

To improve the damage efficiency of the anti-aircraft warhead, an inertia excitation energetic projectile kill element was designed. The impact initiation experiments of projectiles with two different inertial body structures were carried out, and the initiation time under different impact conditions was measured. The results show that the bi-conical inertial body is more effective for the excitation of the projectile compared with the blunt cylindrical inertia body, and can release energy behind the target. The effects of impact velocity on the initiation were analyzed, which could be a basis for further mechanism research.

参考文献

[1]
WANG Hai-fu, ZHENG Yuan-feng, YU Qing-bo, et al. Impact-induced initiation and energy release behavior of re-active materials[J]. Journal of Applied Physics, 2011, 110(7): 074904-074904-6.
[2]
ZHANG X F, SHI A S, QIAO L, et al. Experimental studyon impact-initiated characters of multifunctional energeticstructural materials[J]. Journal of Applied Physics, 2013, 113(8): 083508-083510.
[3]
GE Chao, DONG Yong-xiang, MAIMAITITUERSUN W, etal. Experimental study on impact-induced initiation thresholdsof polytetrafluoroethylene/Aluminum composite[J]. Propel-lants Explosives Pyrotechnics, 2017, 42(5): 514-522.
[4]
AMES R G. A standardized evaluation technique for reactive warhead fragments[C]// GÁLVEZ F,SÁNCHEZ-GÁLVEZ V. Proceeding of 23rd International Symposium Ballistics. Spain: International Ballistics Committee,2007: 16-20.
[5]
AMES RG Vented chamber calorimetry for impact-initia-ted energetic materials[C] // 43rd AIAA Aerospace Sci-ences Meeting and Exhibit, 2005: 15391-45403.
[6]
韩志跃, 姚谦, 杨月桢,等. 富氮含能化合物合成方法研究进展[J]. 兵器装备工程学报, 2016, 37(11): 119-123.
[7]
DE Technologies Inc. Reactive fragment warhead for enhanced neutralization of mortar,rocket,and missile threats[EB/ OL]. (2006-05-15)[2018-03-05]. http://www.detk.com.
[8]
纪录,吴国东,王超,等. 高斯曲线药型罩起爆方式研究[J]. 兵器装备工程学报, 2017, 38(12): 80-85.
[9]
张斐,周春桂,韩阳阳,等. 玻璃射流对带壳装药冲击起爆的数值模拟[J]. 兵器装备工程学报,2017,38(12): 86-89.
[10]
李素云,吴国东,李庆鑫,等. 射流剩余速度在冲击起爆判定中的应用[J]. 兵器装备工程学报, 2017,38(12): 115-119.
[11]
杨华楠,廖雪松,王绍慧,等. 含能破片技术与应用[J]. 四川兵工学报, 2010, 31(12): 4-7.
[12]
李杰. 可爆破片式反导技术研究[D]. 南京: 南京理工大学, 2006.
[13]
何源,何勇,张先锋,等. 含能破片冲击起爆临界条件研究[J]. 弹道学报, 2010, 22(4): 45-49.
[14]
何源,何勇,潘绪超,等. 含能破片冲击引爆屏蔽炸药研究[J]. 南京理工大学学报, 2011, 35(2): 187-193.
[15]
樊科社,吴江涛,李平仓,等. 不同起爆方式对钛/钢复合板质量的影响[J]. 兵器装备工程学报,2017(8): 175-177.
[16]
李旭锋,李向东,顾文彬,等. 含能破片引爆带壳炸药过程的数值模拟[J]. 爆炸与冲击, 2014, 34(2): 202-208.
文章导航

/