相关技术

存储测试模块抗高冲击结构设计研究

  • 孟令军 ,
  • 赵盼盼
展开
  • 1 中北大学仪器科学与动态测试教育部重点实验室,太原 030051
    2 中北大学电子测试技术国家重点实验室,太原 030051

孟令军(1969-),男,山东青岛人,副教授,硕士研究生导师,研究方向:集成测量系统及仪器、微纳仪器及测试技术。

收稿日期: 2015-01-28

  网络出版日期: 2025-05-30

基金资助

国家自然科学基金(50975266);国家自然基金重大研究计划(91123036)

Anti-impact Design for Storage Test Module

  • MENG Lingjun ,
  • ZHAO Panpan
Expand
  • 1 Key Laboratory of Instrumentation Science & Dynamic Measurement(North University of China), Ministry of Education, Taiyuan 030051, China
    2 National Key Laboratory of Electronic Measurement Techndogy, North University of China, Taiyuan 030051, China

Received date: 2015-01-28

  Online published: 2025-05-30

摘要

通过分析高过载条件下存储测试模块的侵彻破坏机理及其缓冲防护原理,并对撞击过程进行动态模拟,分析电路板所受最大应力及衰减情况,从而得出关于存储模块的微型化设计,根据牛顿第二定理建立了存储模块的波动方程,研究了应力波在变截面体的传播规律,得出应力波的传递特性。与传统的存储结构进行分析比较,并进行炮击试验,得到最大加速度值约40000g,传统结构最大加速度值约60000g,该结构具有更高的缓冲性能与抗冲击性。

本文引用格式

孟令军 , 赵盼盼 . 存储测试模块抗高冲击结构设计研究[J]. 弹箭与制导学报, 2016 , 36(1) : 140 -142 . DOI: 10.15892/j.cnki.djzdxb.2016.01.035

Abstract

Based on analysis on penetration failure mechanism and buffering protection principles of storage test module under high-overload and dynamic simulation on impact, the maximum stress which circuit board suffered from and its attenuation were analyzed, accurate data and some conclusions about structure miniaturization were got.According to Newton's second theorem, the wave equation of the module was established and the stress wave propagation in variable sections was acquired.Compared with traditional structures by means of shell-ing, the maximum acceleration of the proposed is about 40 000 g while that of the traditional is about 60 000 g, from those experimental re-sults, it can be concluded that the proposed structure in this paper has higher cushioning properties and impact resistance.

参考文献

[1]
姬永强, 李映辉, 聂飞. 弹载数据存储模块抗高过载防护技术研究[J]. 振动与冲击, 2012, 31(18):104-106.
[2]
刘俊, 石云波, 游春. 高过载测试中结构防护模型研究[J]. 测试技术学报, 2005, 19(3):249-253.
[3]
刘晓鹏, 石云波, 朱政强. 应力波在弹体侵彻靶板中的传播特性研究[J]. 仪器仪表学报, 2008, 29(8):557-559.
[4]
徐鹏, 范锦彪, 祖静, 等. 高g值冲击下存储测试电路模块缓冲保护研究[J]. 实验力学, 2005, 20(4):610-614.
[5]
吴晓莉, 张河. 高冲击下电子线路灌封材料的缓冲机理及措施研究[J]. 包装工程, 2004, 25(1):44-46.
[6]
姚磊, 李永池. 应力波在变截面体中的传播特性[J]. 爆炸与冲击, 2007, 27(4):345-347.
[7]
鲍爱达, 陈员娥, 李长龙, 等. 弹载加速度记录仪在冲击环境下的失效研究[J]. 振动与冲击, 2012, 32(13):82-85.
文章导航

/