[an error occurred while processing this directive] [an error occurred while processing this directive] [an error occurred while processing this directive]
[an error occurred while processing this directive]

弹箭与制导学报 >

2016 , Vol. 36 >Issue 1: 55 - 58,62

DOI: https://doi.org/10.15892/j.cnki.djzdxb.2016.01.014

弹药技术

D字形预制破片战斗部破片能量分布特性

  • 李振铎 ,
  • 李翔宇 ,
  • 卢芳云 ,
  • 王马法 ,
  • 梁民族
展开
  • 国防科学技术大学理学院工程物理研究所,长沙 410073

李振铎(1991-),男,天津人,硕士研究生,研究方向:高效毁伤战斗部技术。

收稿日期: 2015-01-23

  网络出版日期: 2025-05-30

基金资助

国家自然科学基金项目(11202237;11132012)

收起

Study on Fragment Energy Distribution Characteristics of Premade D-shape Warhead

  • LI Zhenduo ,
  • LI Xiangyu ,
  • LU Fangyun ,
  • WANG Mafa ,
  • LIANG Minzu
Expand
  • Institute of Engineering Physics, College of Science, National University of Defense Technology, Changsha 410073, China

Received date: 2015-01-23

  Online published: 2025-05-30

Fold

摘要

为了分析非对称结构在爆炸作用下的能量输出规律,文中以D字形结构为研究对象,对其在端部偏心和中心起爆下的破片飞散特性进行了实验研究,同时结合有限元计算软件LS-DYNA对5种不同结构在不同起爆方式下的破片飞散过程进行数值模拟,获得了破片能量分布规律。研究结果表明:双端面偏心起爆为D字形结构起爆的最优方式,横截面直线部分对应的圆心角介于90°~120°间时毁伤效果更好。

关键词： 爆炸力学; 非对称结构; 预制破片; 能量分布; 端面

本文引用格式

李振铎 , 李翔宇 , 卢芳云 , 王马法 , 梁民族 . D字形预制破片战斗部破片能量分布特性[J]. 弹箭与制导学报, 2016 , 36(1) : 55 -58,62 . DOI: 10.15892/j.cnki.djzdxb.2016.01.014

Abstract

In order to obtain explosion energy dispersion rules of confined asymmetric structure, experiments of a D-shape warhead in center initiation mode and off-center initiation mode on end faces were conducted to analyze fragment projection angles.The fragment ejection process of five different structures at different initiation modes were simulated by using the finite element software LS-DYNA.The study result shows that:as for the D-shape warhead, off-center initiation at both ends is the best initiation mode; Better damage effect can be achieved by controlling length of deformed arc intervenient between third and quarter of circumference.

Key words： explosion mechanics; asymmetric structure; premade fragment; energy distribution; end face

[an error occurred while processing this directive]

参考文献

[1]
卢芳云, 李翔宇, 林玉亮. 战斗部结构与原理[M]. 北京: 科学出版社, 2009: 112-429.
[2]
李记刚, 余文力, 王涛. 定向战斗部的研究现状及发展趋势[J]. 飞航导弹, 2005 (5):25-29.
[3]
曾新吾, 王志兵, 张震宇,等. 爆炸变形战斗部初探[J]. 兵工学报, 2004, 25(3):285-288.
[4]
TAYLOR GI. Analysis of the explosion of a long cylindrical bomb detonated at one end[M]. Cambridge: Cambridge University Press, 1963: 277-286.
[5]
CHOU PC, CARLEONE J, FLIS WJ, et al. Improved for-mulas for velocity, acceleration, and projection angle of ex-plosively dirven liers[J]. Propellants, Exposives, Pyro-technics, 1983, 8(6):175-483.
[6]
HELD M. Velocity enhanced warheads[J]. Journal of Ex-plosives and Propellants, 2001, 17(2):1-42.
[7]
隋树元, 周兰庭, 李进宋,等. 破片式战斗部优化设计技术研究[J]. 兵工学报, 1995 (4):33-37.
[8]
李翔宇, 卢芳云, 王志兵,等. 可变形定向破片战斗部模型试验和数值模拟研究[J]. 国防科技大学学报, 2006, 28(1):121-124.
[9]
龚柏林, 卢芳云, 李翔宇. D型预制破片战斗部破片飞散过程的数值模拟[J]. 弹箭与制导学报, 2010, 30(1):88-90.
[10]
隋树元, 王树山. 终点效应学[M]. 北京: 国防工业出版社, 2000: 87-90.
Options
文章导航

/

〈 〉

[an error occurred while processing this directive]