[an error occurred while processing this directive] [an error occurred while processing this directive] [an error occurred while processing this directive]
[an error occurred while processing this directive]
弹药技术

一种无控子母弹落点散布分析

  • 孙传杰 ,
  • 卢永刚
展开
  • 中国工程物理研究院总体工程研究所,四川绵阳 621900

孙传杰(1976-),男,四川新都人,工程师,硕士,研究方向:战斗部终点效应。

收稿日期: 2009-03-20

  网络出版日期: 2025-05-19

Analysis of Submunition Distribution of an Unguided Cluster Munition

  • SUN Chuanjie ,
  • LU Yonggang
Expand
  • Institute of Systems Engineering, CAEP, Sichuan Mianyang 621900, China

Received date: 2009-03-20

  Online published: 2025-05-19

摘要

针对海上运动目标,为研究抛撒点参数对子弹落点散布半径和子弹下落时间的综合影响,建立了无控子母弹抛撒质点弹道计算模型,对比分析了不同抛撒条件对子弹落点散布半径和子弹下落时间的影响规律和影响程度。研究结果表明,抛撒点高度和母弹速度对子弹落点散布半径和子弹下落时间的影响最大,是抛撒点参数设定须重点关注的因素。

关键词: 外弹道; 拋撒; 子母弹

本文引用格式

孙传杰 , 卢永刚 . 一种无控子母弹落点散布分析[J]. 弹箭与制导学报, 2010 , 30(1) : 109 -111,118 . DOI: 10.15892/j.cnki.djzdxb.2010.01.028

Abstract

In order to study influence of dispension parameters on distribution radius and falling time of submunition striking moving sea-object, point mass ballistic equations is build and then programmed Analysis of effect of diffent dispension parameters on distribution radius and falling time of submunition is carried out, the results show that the dispension height and velocity of cluster munition are very important parameters, therefore emphasis should be paid on them when designing dispension parameters.

[an error occurred while processing this directive]

参考文献

[1]
杨启仁. 子母弹飞行动力学[M]. 北京: 国防工业出版社, 1999.
[2]
徐明友. 现代外弹道学[M]. 北京: 兵器工业出版社, 1999.
[3]
钱杏芳. 导弹飞行力学[M]. 北京: 北京工业学院出版社, 1987.
[4]
宋丕极. 枪炮与火箭外弹道学[M]. 北京: 兵器工业出版社, 1993.
[5]
张有济. 战术导弹飞行力学设计(上)[M]. 北京: 宇航出版社, 1998.
[6]
裴益轩, 刘庆明, 白春华. 子母型航空燃料空气炸弹子弹散布仿真研究[J]. 北京理工大学学报, 2002, 22(5): 622- 625.
[7]
李军营, 张毅, 马清华. 子母弹弹道模型建立及仿真[J]. 飞行力学, 2003, 21(1): 39- 41.
[8]
唐雪梅, 邵凤昌, 雷宁利. 集束战斗部子弹药抛撒半径及母弹解爆高度确定方法[J]. 战术导弹技术, 2000(4): 8- 10.
[9]
徐文旭, 唐雪梅, 蒙源愿. 导弹子母弹子弹拋撒弹道模型及数字仿真[J]. 宇航学报, 2000, 22(2): 72- 78.
文章导航

/

[an error occurred while processing this directive]