[an error occurred while processing this directive] [an error occurred while processing this directive] [an error occurred while processing this directive]
[an error occurred while processing this directive]

弹箭与制导学报 >

2010 , Vol. 30 >Issue 1: 115 - 118

DOI: https://doi.org/10.15892/j.cnki.djzdxb.2010.01.029

弹药技术

阶梯式旋转 EFP 成形机理的数值研究

  • 李惠明 ,
  • 陈智刚 ,
  • 侯秀成 ,
  • 任中才
展开
  • 1 中北大学机电工程学院,太原 030051
    2 总装备部军械局,北京100081

李惠明(1985-),男,江苏东台人,硕士研究生,研究方向:弹箭远程与高效毁伤技术。

收稿日期: 2009-04-05

  网络出版日期: 2025-05-19

收起

Numerical Simulation of Formation Mechanism of Ladder-shaped Rotational EFP

  • LI Huiming ,
  • CHEN Zhigang ,
  • HOU Xiucheng ,
  • REN Zhongcai
Expand
  • 1 School of Mechatronics Engineering, North University of China, Taiyuan 030051, China
    2 Ordnance Bureau, General Armaments Department, Beijing 100081, China

Received date: 2009-04-05

  Online published: 2025-05-19

Fold

摘要

应用阶梯式药型罩对称凹凸结构的方法研究出一种旋转稳定而且带倾斜尾翼的EFP,利用TG建立三维有限元模型,采用非线性动力分析软件,分别对大锥角和球缺两种形式的阶梯药型罩成形情况进行模拟,最后通过对形成弹丸的外形及速度进行了分析,得出阶梯式药型罩有利于成型弹丸的飞行稳定,而且球缺罩成型情况要优于锥角罩。

关键词： 阶梯; EFP; 旋转稳定; 数值模拟

本文引用格式

李惠明 , 陈智刚 , 侯秀成 , 任中才 . 阶梯式旋转 EFP 成形机理的数值研究[J]. 弹箭与制导学报, 2010 , 30(1) : 115 -118 . DOI: 10.15892/j.cnki.djzdxb.2010.01.029

Abstract

Using the ladder shaped charge linear symmetric concave and convex structure method; this method developed a spin-stabilized EFP with inclined tail wing. The forming of big cone angle and spherical segment ladder shaped charge liner was simulated by nonlinear dynamic analysis software. The three-dimensional finite element mode was built by TG. At last, it analyzed the projectile forming shape and velocity and drew two conclusion : (1)ladder shaped charge liner is favorable to the projectile flying stability. (2)spherical segment shaped charge liner forming is better than angle.

Key words： ladder shaped; EFP; spin-stabilized; simulation

[an error occurred while processing this directive]

参考文献

[1]
王儒策, 赵国志, 杨绍卿. 弹药工程[M]. 北京: 北京理工大学出版社, 2002.
[2]
王卫民, 许有法, 齐杏林. 弹药系统分析与设计[M]. 北京: 国防工业出版社, 2006.
[3]
苟瑞君, 刘天生, 王凤英. 爆炸成形弹丸药型罩研究[J]. 爆炸与冲击, 2003,(3): 259- 261.
[4]
陶刚, 朱鹤荣, 石连捷. 爆炸成形弹丸药型罩结构分析[J]. 弹道学报, 1995, 7(3): 84- 86.
[5]
常向阳, 王自力. 爆炸成形弹丸侵彻钢板的 ALE 算法[J]. 解放军理工大学学报, 2004, 5(3): 70- 73.
[6]
JOHNSON GR, COOK W H. A constitutive model and data for metals subjected to large, strain, high strain rates and high temperatures[C]// Proceedings of the 7th Internatinal Symposium on Ballistics, Hague, 1983.
Options
文章导航

/

〈 〉

[an error occurred while processing this directive]