金属蜂窝增强陶瓷复合装甲抗侵彻性能研究

  • 徐国军 ,
  • 张俊 ,
  • 郑兴伟 ,
  • 曹守启 ,
  • 蔡正祥
展开
  • 上海海洋大学工程学院,上海 201306

徐国军(1992-),男,河南信阳人,硕士研究生,研究方向:装甲抗冲击动力学研究。

收稿日期: 2019-01-15

  网络出版日期: 2025-05-20

基金资助

国家自然科学基金(51775329);上海市科委创新行动计划(17050502000);上海市(临港)产学研合作项目(沪临地管委经[2017]56号)

Anti-penetration Property of the Metal Honeycomb Enhanced Ceramic Composite Armor

  • XU Guojun ,
  • ZHANG Jun ,
  • ZHENG Xingwei ,
  • CAO Shouqi ,
  • CAI Zhengxiang
Expand
  • College of Engineering Science and Technology, Shanghai Ocean University, Shanghai 201306, China

Received date: 2019-01-15

  Online published: 2025-05-20

摘要

为了提高传统层叠金属陶瓷复合装甲的抗侵彻性能,设计了一种由金属蜂窝骨架、陶瓷、金属板及环氧树脂胶结剂所组成的新型复合装甲结构。通过数值模拟研究钢质弹丸正侵彻和斜侵彻该型复合靶板时的抗侵彻性能,并与层叠金属陶瓷复合靶板进行对比分析。结果表明:金属蜂窝骨架吸收了弹丸大量能量,同时配合环氧树脂胶结剂对陶瓷进行约束,大幅度提高了复合装甲的抗侵彻性能;与层叠金属陶瓷复合靶板相比,金属蜂窝陶瓷复合靶板具有更优异的抗斜侵彻能力。

本文引用格式

徐国军 , 张俊 , 郑兴伟 , 曹守启 , 蔡正祥 . 金属蜂窝增强陶瓷复合装甲抗侵彻性能研究[J]. 弹箭与制导学报, 2019 , 39(2) : 92 -96 . DOI: 10.15892/j.cnki.djzdxb.2019.02.022

Abstract

To improve anti-penetration property of traditional laminated metal ceramic composite armor, a new composite structure is proposed by which consisting of the metal honeycomb skeleton, ceramic, epoxy resin binder, metal panel and back panel. The anti-penetration property of the composite target plate at different angles is analyzed, and compared with the equal thickness of laminated metal ceramic composite target plate. The results show that the anti-penetration property of the composite target plate is largely enhanced because the ceramic is restrained by the metal honeycomb skeleton structures and epoxy, and the metal honeycomb skeleton structures absorb a lot of energy from projectile. Compared with the veneered metal ceramic composite target plate, the metal honeycomb ceramic composite target plate has superior anti-oblique penetration ability.

参考文献

[1]
KAUFMANN C, CRONIN D, WORSWICK M, et al. Influence of material properties on the ballistic performance ofceramics for personal body armour[J]. Shock and Vibra-tion, 2003. 10 1: 51- 58.
[2]
ASADI A, VANINI A S, JABBARI A. Investigation on theimpact behavior of Al?O?-SiC-MgO nanoceramic/metal lam-inated composite[J]. Journal of Mechanical Science andTechnology, 2011. 25 9: 2179– 2184.
[3]
邹磊, 杨文兵. 陶瓷/金属复合板抗侵彻问题的数值模拟. 弹箭与制导学报, 2008, 28 5: 99- 101.
[4]
WEBER K, HOLMQUIST TJ, TEMPLETON D W. Theresponse of layered Aluminum nitride targets subjected tohypervelocity impact[J]. International Journal of ImpactEngineering, 2001, 26: 831- 841.
[5]
SARVA S, NEMAT-NASSER S, MCGEE J, et al. The effectof thin membrane restraint on the ballistic performance ofarmor grade ceramic tiles J. International Journal of Im-pact Engineering, 2007, 34 2: 277- 302.
[6]
于少娟, 李永池, 张先锋, 等. 约束陶瓷靶抗射流侵彻实验研究. 中国科学技术大学学报, 2008, 38 11: 1299– 1303.
[7]
YUNGWIRTH C J, RADFORD DD, ARONSON MA, etal. Experiment assessment of the ballistic response of com-posite pyramidal lattice truss structures[J]. Composites:Part B Engineering, 2008, 39 3: 556- 569.
[8]
张俊, 郭锐, 刘荣忠, 等. 金属桁架增强陶瓷复合装甲抗弹性能研究[J]. 南京理工大学学报(自然科学版), 2012, 36 5: 773- 778.
[9]
倪长也, 金峰, 卢天健, 等. 3种点阵金属三明治板的抗侵彻性能模拟分析[J]. 力学学报, 2010, 42 6: 1125– 1137.
[10]
Livermore Software Technology Corporation. LS-DYNA key-word user's manual: Version 970[M] California: Liver-more Software Technology Corporation, 2003: 415- 418.
[11]
时党勇, 李裕春, 张胜民. 基于ANSYS/LS-DYNA 8.1 进行显式动力学分析[M]. 北京: 清华大学出版社, 2005: 130- 150.
文章导航

/