[an error occurred while processing this directive] [an error occurred while processing this directive] [an error occurred while processing this directive]
[an error occurred while processing this directive]

弹箭与制导学报 >

2019 , Vol. 39 >Issue 1: 93 - 96

DOI: https://doi.org/10.15892/j.cnki.djzdxb.2019.01.020

夹层聚能装药形成杆式射流数值模拟

  • 徐全振 ,
  • 尹建平
展开
  • 中北大学机电工程学院,太原 030051

徐全振(1991-),男,山东荷泽人,博士研究生,研究方向:高效毁伤技术。

收稿日期: 2017-11-15

  网络出版日期: 2025-05-21

基金资助

国家自然科学基金(11572291);山西省研究生联合培养基地人才培养项目(20160033)资助

收起

Numerical Simulation on Forming JPC With Double Layer Shaped Charge

  • XU Quanzhen ,
  • YIN Jianping
Expand
  • School of Mechatronics Engineering, North University of China, Taiyuan 030051, China

Received date: 2017-11-15

  Online published: 2025-05-21

Fold

摘要

为研究夹层聚能装药结构对杆式射流的影响,利用非线性动力学软件Autodyn对不同爆速炸药匹配下爆轰波的传播及杆式射流的成型进行了数值模拟,得到了杆式射流的特性参数和侵彻装甲钢的模拟结果。研究表明:爆速外高内低的夹层聚能装药能显著调节爆轰波形,有效提高杆式射流的特性参数;基于文中夹层聚能装药结构的杆式射流对装甲钢的侵彻深度提高了28%,且开孔形态更为均匀。

关键词： 夹层聚能装药; 杆式射流; Autodyn; 爆轰波

本文引用格式

徐全振 , 尹建平 . 夹层聚能装药形成杆式射流数值模拟[J]. 弹箭与制导学报, 2019 , 39(1) : 93 -96 . DOI: 10.15892/j.cnki.djzdxb.2019.01.020

Abstract

In order to research the impact of double layer shaped charge on JPC (Jetting Projectile Charge), the propagation process of detonation and the formation of JPC were studied with the finite element code Autodyn. The characteristic parameters of JPC and its penetration performance were researched by numerical simulation. The result shows that the double layer shaped charge with the outer layer at higher detonation velocity can adjust the detonation shape obviously and enhance the characteristic parameters effectively. With the structure of double layer shaped charge in this paper, the penetration depth on RHA has been increased by 28% and the shape of penetrating hole is smoother.

Key words： double layer shaped charge; jetting projectile charge; Autodyn; detonation wave

[an error occurred while processing this directive]

参考文献

[1]
HELD M Behavior of dual composition explosives[C] // Masson P. Proceedings of 6th International Congress of Pyrotechnics. Tous: EUROPYRO, 1995: 185 – 191.
[2]
LIU Z Y, TANAKA K, ITOH S. A method for producingextra-high dyncamic pressure due to the efficient use of highexplosive[J]. Journal of Pressure Vessel Technology, 2004, 126(2): 264-268.
[3]
STUIVINGA M, VERBEEK HJ, CARTON EP. The doubleexplosive layer cylindrical compaction method[J]. Journal ofMaterials Processing Technology, 1999, 85(1/2/3): 115 – 120.
[4]
HAMADA T, ITOH S, KATO H. An investigation on over-driven detonation phenomenon in concentric double cylin-drical high explosiveJ. Materials Science Forum, 2004, 465/466: 379-384.
[5]
李福金. 夹层聚能装药的破甲试验研究与分析// 丁世用. 破甲技术文集. 北京: 兵器工业出版社, 1992: 97-98.
[6]
张先锋, 丁建宝, 赵晓宁. 夹层聚能装药作用过程的数值模拟. 爆炸与冲击,2009,29(6): 617 – 624.
[7]
FUNSTON RJ, MATTSSON K V, OUYEN N. K-charge-amultipurpose shaped charge warhead: US 6393991[P]. 2002-05-28.
[8]
MATTSSON K, CHVRCH J. Development of the K-charge,a short L/D shaped charge[C] // IBS. Proceedings of the18th International Symposium on Ballistics. Orlando: IBS, 1999: 528-534.
[9]
黄正祥. 聚能杆式侵彻体成型机理研究[D]. 南京: 南京理工大学, 2003.
[10]
黄正祥, 张先锋, 陈惠武. 飞片起爆条件下聚能杆式侵彻体成型数值模拟[J]. 系统仿真学报,2005,17(8): 1830-1832.
[11]
李伟兵, 王晓鸣, 李文彬,等. 环形多点起爆精度对聚能杆式侵彻体成型的影响J. 爆炸与冲击,2010,30(1): 45-50.
[12]
李伟兵, 樊菲, 王晓鸣,等. 杆式射流与射流转换的双模战斗部优化设计】兵工学报,2013,34(12): 1500 – 1505.
[13]
樊菲. 实现杆流与射流转换的研究[D]. 南京: 南京理工大学, 2012.
Options
文章导航

/

〈 〉

[an error occurred while processing this directive]