[an error occurred while processing this directive] [an error occurred while processing this directive] [an error occurred while processing this directive]
[an error occurred while processing this directive]

弹箭与制导学报 >

2023 , Vol. 43 >Issue 6: 19 - 28

DOI: https://doi.org/10.15892/j.cnki.djzdxb.2023.06.004

双层罩轴向组合式装药结构MEFP数值模拟

  • 辛广华 1, 2 ,
  • 杨宝良 3 ,
  • 景彤 3 ,
  • 赵太勇 2 ,
  • 王维占 2 ,
  • 易荣成 4 ,
  • 王卓硕 1, 2 ,
  • 周滔 1, 2
展开
  • 1 中北大学机电工程学院,山西 太原 030051
  • 2 中北大学地下目标毁伤技术国防重点学科实验室,山西 太原 030051
  • 3 西安现代控制技术研究所,陕西 西安 710065
  • 4 重庆长安工业(集团)有限责任公司,重庆 401120
赵太勇(1971—),男,副教授,硕士,研究方向:弹药工程与毁伤技术。

辛广华(1997—),男,硕士研究生,研究方向:战斗部高效毁伤。

收稿日期: 2023-08-29

  网络出版日期: 2024-12-30

收起

Numerical Simulation of MEFP for Axial Combined Charge Structures with Double Layer Liners

  • XIN Guanghua 1, 2 ,
  • YANG Baoliang 3 ,
  • JING Tong 3 ,
  • ZHAO Taiyong 2 ,
  • WANG Weizhan 2 ,
  • YI Rongcheng 4 ,
  • WANG Zhuoshuo 1, 2 ,
  • ZHOU Tao 1, 2
Expand
  • 1 School of Mechanical and Electrical Engineering, North University of China, Taiyuan 030051,Shanxi,China
  • 2 National Defense Key Laboratory of Underground Target Damage Technology, North University of China, Taiyuan 030051,Shanxi,China
  • 3 Xi'an Modern Control Technology Research Institute, Xi'an 710065,Shaanxi,China
  • 4 Chongqing Chang'an Industry (Group) Co., Ltd., Chongqing 401120, China

Received date: 2023-08-29

  Online published: 2024-12-30

Fold

摘要

为提高多爆炸成型弹丸(MEFP)对装甲目标的侵彻能力,提出一种双层罩轴向组合式装药结构MEFP。MEFP采用中心1枚双层,周向8枚双层的药型罩结构。在爆炸成型过程中,中心双层主罩可成型2枚EFP,周向8枚双层辅罩可成型16枚EFP,对装甲有多点位、双重侵彻毁伤。基于该结构的可行性,利用ANSYS/LS-DYNA软件对该MEFP成型及侵彻过程进行了数值模拟,具体分析了装药高度、主(辅)曲径比、主(辅)壁厚、主(辅)前后级壁厚比等因素对其成型过程的影响,并将较好的成型结果对45#钢靶板进行了侵彻仿真。研究结果表明:在装药高度75 mm、主(辅)曲径比为1.0(1.3)、主(辅)壁厚4 mm(2.5 mm)、主(辅)前后级壁厚比值0.5时,MEFP成型较好。MEFP在穿透两层12 mm 45#钢靶板后,仍具有一定的后效侵彻能力;在炸高大于2 m时,成型的MEFP具有多点位毁伤效应,且随着炸高的增加,毁伤落点半径增大。研究的双层罩轴向组合式装药结构MEFP结构对末敏弹战斗部设计具有重要的参考意义。

关键词： 双层药型罩; 轴向组合式装药; MEFP; 数值模拟

本文引用格式

辛广华 , 杨宝良 , 景彤 , 赵太勇 , 王维占 , 易荣成 , 王卓硕 , 周滔 . 双层罩轴向组合式装药结构MEFP数值模拟[J]. 弹箭与制导学报, 2023 , 43(6) : 19 -28 . DOI: 10.15892/j.cnki.djzdxb.2023.06.004

Abstract

To improve the penetration ability of multiple explosively formed projectiles (MEFP) against armored targets, a double-layer shield axial combination charge structure MEFP is proposed. The MEFP adopts a double-layer liner structure with 1 in the center and 8 double-layer liners in the circumferential direction. During the explosion forming process, the central double layer main cover can form 2 EFPs, and the circumferential 8 double layer auxiliary covers can form 16 EFPs, which can cause multi-point and dual penetration damage to the armor. Based on the feasibility of this structure, numerical simulation is conducted on the formation and penetration process of the MEFP using ANSYS/LS-DYNA software. The effects of factors such as charge height, main (auxiliary) curvature ratio, main (auxiliary) wall thickness, and main (auxiliary) front and rear stage wall thickness ratio on its formation process are analyzed in detail. The good formation results are used for penetration simulation on the 45 # steel target plate. The research results indicate that MEFP is well formed with the charge height being 75 mm, the main (auxiliary) curvature ratio being 1.0 (1.3), the main (auxiliary) wall thickness being 4 mm (2.5 mm), and the ratio of the main (auxiliary) front and rear wall thickness being 0.5. After penetrating two layers of 12 mm 45 # steel target plates, MEFP still has a certain aftereffect penetration ability; When the explosion height is greater than 2 m, the formed MEFP has a multi-point damage effect, and as the explosion height increases, the damage drop radius increases. The research and design of the double-layer cover axial combination charge structure MEFP has important reference significance for the terminal sensitive projectile warhead.

Key words： double-layer liners; axial combined charge; MEFP; numerical simulation

[an error occurred while processing this directive]

参考文献

原文顺序 | 文献年度倒序 | 文中引用次数倒序
[1]
CURTIS J P, CORNISH R. Formation model for shaped charged liners comprising multiple layers of different materials[C] // ISB. Proceedings of the 18th International Symposium on Ballistic. Nevada: ISB, 1999: 458-465.

[2]
龙源, 毛振兴, 刘健峰, 等. 曲率半径对双层药型罩EFP战斗部成形及侵彻的影响[J]. 爆破器材, 2016, 45(3): 5-10.

LONG Y, MAO Z X, LIU J F, et al. The effect of radius of curvature on the forming and penetration of the EFP fighting part of a double-layer flux hood[J]. Explosive Material, 2016, 45(3): 5-10.

[3]
HONG S C, NIU Y M. Numerical simulation of the multiplayer explosively formed projectile[C] // IBS. Proceedings of the 15th International Symposium on Ballistic. Nevada: IBS, 1995: 315-324

[4]
FONG R, NG W, WEIMAN K. Testing and analysis of multiliner EFP warheads[C] // IBS. Proceedings of the 20th International Symposium on Ballistics. Nevada: IBS, 2002: 578 -582.

[5]
杨帅, 郭光全, 石晓山, 等. 串联爆炸成型弹丸外弹道特性仿真[J]. 兵器装备工程学报, 2018, 39(8): 30-34.

YANG S, GUO G Q, SHI X S, et al. Simulation of exterior trajectory characteristics of tandem explosively formed projectile[J]. Journal of Ordnanace Equipment Engineering, 2018, 39(8): 30-34.

[6]
杨朝霞, 陈智刚, 杨宝良, 等. 阶梯式双层EFP成型及侵彻性能数值模拟[J]. 兵器装备工程学报, 2022, 43(3): 79-86.

YANG Z X, CHEN Z G, YANG B L, et al. Numerical simulation on formation process and penetration of stepped double-layer EFP[J]. Journal of Ordnanace Equipment Engineering, 2022, 43(3): 79-86.

[7]
王维占, 李小军, 雷文星, 等. 包覆式双层EFP成型数值模拟[J]. 弹箭与制导学报, 2018, 38(6): 103-108.

WANG W Z, LI X J, LEI W X, et al. Numerical simulation of double-layer cladding EFP molding process[J]. Journal of Projectiles, Rockets, Missiles and Guidance. 2018, 38(6): 103-108.

[8]
滕桃居, 陈磊, 石祥. 不同材料双层药型罩EFP成型及侵彻性能数值模拟[J]. 弹箭与制导学报, 2014, 34(5): 113-116.

TENG T J, CHEN L, SHI X. Numerical simulation on formation process and penetration performance of double layer liners EFP with different materials[J]. Journal of Projectiles, Rockets, Missiles and Guidance, 2014, 34(5): 113-116.

[9]
FONG R, NG W, TANG S, et al. Multiple explosively formed penetrator (MEFP) warhead technology for mine and improvised explosive device (IED) neutralization[C]// ISB. Proceedings of the 22th International Symposium on Ballistics. Nevada: IBS, 2005: 669-677.

[10]
尹建平. 多爆炸成型弹丸战斗部技术[M]. 北京: 国防工业出版社, 2012.

YIN J P. Multiple explosively formed projectile warhead technology[M]. Beijing: National Defense Industry Press, 2012.

[11]
苗润源, 梁争峰. 防空反导用多爆炸成型弹丸技术现状与发展[J]. 飞航导弹学报, 2017(7): 89-93.

MIAO R Y, LIANG Z F. Current status and development of multi-explosively formed projectile for air defense and missile defense[J]. Aerodynamic Missile Journal, 2017(7): 89-93.

[12]
LIU J F, LONG Y, JI C, et al. Numerical and experimental study on the formation and dispeesion patterns of multiple explosively formed penetrators[J]. Latin American Journal of Solids and Structures, 2017, 14(4): 685-699.

[13]
MA G S, HE G L, ZHANG Y L, et al. Numerical simulation of the forming characteristics of the circumferential MEFP with integrated shell and liner[J]. Journal of Physics: Conference Series, 2021(1): 1204-1210.

[14]
周滔, 杨宝良, 易荣成, 等. 端面MEFP成型及威力性能的数值模拟研究[J]. 兵器装备工程学报, 2023, 44(5): 89-99.

ZHOU T, YANG B L, YI R C, et al. Numerical simulation on forming and power performance of end face MEFP[J]. Journal of Ordnance Equipment Engineering, 2023, 44(5): 89-99.

[15]
朱斐宇, 姜春兰. 组合式MEFP成型及对典型无人机的侵彻性能[J]. 兵器装备工程学报, 2022, 43(10): 130-136.

ZHU F Y, JIANG C L. Combined MEFP molding and penetration performance of typical UAV[J]. Journal of Ordnance Equipment Engineering, 2022, 43(10): 130-136.

[16]
杨宝良, 陈秀文, 申孝立, 等. 不同起爆方式下MEFP战斗部的数值模拟[J]. 弹箭与制导学报, 2006, 26(3): 108-109.

YANG B L, CHEN X W, SHEN X L, et al. Numerical simulation of the MEFP warhead with the different modes detonation[J]. Journal of Projectiles, Rockets, Missiles and Guidance, 2006, 26(3): 108-109.

[17]
KIM H S, YEOM K S, KIM S S, et al. Numerical simulation for the front section effect of missile warhead on the target perforation[C]// ISB. Proceedings of the 22nd International Symposium of Ballistics. Nevada: IBS, 2005: 1910-1918.

[18]
尹建平, 王志军. 弹药学[M]. 北京: 北京理工大学出版社, 2017: 229.

YIN J P, WANG Z J. Ammunition theory[M]. Beijing: Beijing Institute of Technology Press, 2017: 229.

Options
文章导航

/

〈 〉

[an error occurred while processing this directive]