[an error occurred while processing this directive] [an error occurred while processing this directive] [an error occurred while processing this directive]
[an error occurred while processing this directive]

Journal of Projectiles, Rockets, Missiles and Guidance >

2022 , Vol. 42 >Issue 5: 38 - 41

DOI: https://doi.org/10.15892/j.cnki.djzdxb.2022.05.008

An Optimal Station Layout Analysis Method for Pose Rendezvous Measurement in Key Sections of Shooting Range

  • HU Xiaoli 1 ,
  • TANG Minggang 1 ,
  • CAI Wenze 2 ,
  • ZHANG Yulun 1 ,
  • ZHANG Siqi 2 ,
  • ZHANG Sanxi 1
Expand
  • 1 No. 63875 Unit, Huayin 714200, Shaanxi, China
  • 2 Xi’an Modern Control Technology Research Institute, Xi’an 710065,China

Received date: 2021-12-27

  Online published: 2025-01-16

Fold

Abstract

Optical pose measurement is mainly based on rendezvous, and the reliability of rendezvous interval determines the availability of measurement data. At present, pose measurement stations are mainly arranged symmetrically along the ballistic center of key sections, mainly based on imaging size and general 60°~120°. In this paper, the accuracy evaluation is used as the evaluation basis for the advantages and disadvantages of station layout. According to the analysis of different test requirements of level flight section and attack section, the important influencing factors of station layout in the shooting range are summarized. Through the analysis of the law of influencing factors on different station layout, the best symmetrical station layout in level flight section and active section or attack section of the shooting range is obtained, which provides a theoretical basis for actual attitude measurement.

Key words： intersection measurement; optimize station layout; pose measurement; intersection interval

Cite this article

HU Xiaoli , TANG Minggang , CAI Wenze , ZHANG Yulun , ZHANG Siqi , ZHANG Sanxi . An Optimal Station Layout Analysis Method for Pose Rendezvous Measurement in Key Sections of Shooting Range[J]. Journal of Projectiles, Rockets, Missiles and Guidance, 2022 , 42(5) : 38 -41 . DOI: 10.15892/j.cnki.djzdxb.2022.05.008

[an error occurred while processing this directive]

References

Publishing order | Descend order by publishing year | Descend order by cited within
[1]
王锋, 李彬, 张得贤, 等. 飞行目标姿态测量中测量站点布设方案研究[J]. 光子学报, 2007, 36(增刊):174-176.

[2]
孟庆利, 王份, 张志敏, 等. 利用光测影像测量飞行目标姿态方法的误差分析[J]. 光子学报, 2007, 36(6):1172-1175.

[3]
周慧. 靶场光电经纬仪最优布站方法研究[J]. 测控技术, 2018, 37(3):142-149.

[4]
王颖, 陈佐龙, 汪向阳, 等. 光雷一体化测量系统的布站优化研究[J]. 科学技术与工程, 2012, 12(5):1111-1114.

[5]
项树林, 刘书田. 基于测量方案的光电经纬仪布站优化模型[J]. 飞行器测控学报, 2009, 28(5):30-34.

[6]
刘鑫伟, 王锋, 杨健强. 经纬仪布站位置对交会测量结果影响的分析[J]. 光电技术应用, 2012, 27(5):64-68.

[7]
于起峰, 孙祥一, 陈国军. 用光测图像确定空间目标俯仰角和偏航角的中轴线法[J]. 国防科技大学学报, 2000, 22(2):15-19.

[8]
王习文, 马军, 陈娟, 等. 飞机三维姿态测量的角平分线方向向量法[J]. 光学精密工程, 2010, 18(2):369-376.

Options
Outlines

/

〈 〉

[an error occurred while processing this directive]