Anti-high Overload Analyses and Design of Missile-borne Recorder

MA  Qiqi; XU  Xiaohui; KONG  Yankai; GUO  Tao

doi:10.15892/j.cnki.djzdxb.2015.01.005

Journal of Projectiles, Rockets, Missiles and Guidance >

2015 , Vol. 35 >Issue 1: 15 - 18

DOI: https://doi.org/10.15892/j.cnki.djzdxb.2015.01.005

MISSILES AND GUIDANCE TECHNOLOGY

Anti-high Overload Analyses and Design of Missile-borne Recorder

MA Qiqi ,
XU Xiaohui ,
KONG Yankai ,
GUO Tao

Expand

1 National Key Laboratory for Electronic Measurement Technology, Narth University of Chian, Taiyuan 030051, China
2 Key Laboratory of Instrumentation Science & Dynamic Measurement (North University of China), Ministry of Education, Taiyuan 030051, China
3 Engineering Project Practice Center, Luoyang Institute of Science and Technology, Henan Luoyang 471023, China

Received date: 2014-02-25

Online published: 2025-05-26

Fold

Abstract

For solving the problems of recorder failure, range experiments and failure reasons, that the main reason is and circuit body. he weakness on recorder andcircuit. Finally experiments the recorder over-load performanceup to 17 thousands G the feasibility of the high over-load design. The optimization foundation for enhancing recorders reliability and getting the projectile flight data accurately.

Key words： missile-borne recorder; reliability; anti-high over-load

Cite this article

MA Qiqi , XU Xiaohui , KONG Yankai , GUO Tao . Anti-high Overload Analyses and Design of Missile-borne Recorder[J]. Journal of Projectiles, Rockets, Missiles and Guidance, 2015 , 35(1) : 15 -18 . DOI: 10.15892/j.cnki.djzdxb.2015.01.005

[an error occurred while processing this directive]

References

[1]	刘俊, 石云波, 马游春. 高过载测试中结构防护模型研究[J]. 测试技术学报, 2005, 19(3):249-253.
[2]	吴虹, 李延夫. 硅压力传感器可靠性强化试验研究[J]. 微纳电子技术, 2007(7/8):288-290.
[3]	任鸿秋. 存储测试系统的可靠性分析[J]. 火力与指挥控制, 2008, 33(4):146-148.
[4]	张栋, 钟培道, 等. 失效分析[M]. 北京: 国防工业出版社, 2004.
[5]	赵小珍. 电子记录系统的抗高过载设计及应用[D]. 太原: 中北大学, 2008.

Options

Outlines