[an error occurred while processing this directive] [an error occurred while processing this directive] [an error occurred while processing this directive]
[an error occurred while processing this directive]

Journal of Projectiles, Rockets, Missiles and Guidance >

2013 , Vol. 33 >Issue 4: 134 - 137

DOI: https://doi.org/10.15892/j.cnki.djzdxb.2013.04.046

CORRELATION TECHNOLOGY

Optimization for Trajectory Correction Accuracy of Target Measurement Based on Monte-Carlo

  • YANG Huijuan ,
  • QU Xiqiang ,
  • HUANG Zheng ,
  • WANG Jiawei
Expand
  • 1 Key Laboratory of Instrumentation Science & Dynamic Measuremen, Ministry of Education(North University of China) Ministry of Education, Taiyuan 030051, China
    2 School of Information and Communication Engineering, North University of China, Taiyuan 030051, China
    3 Xi'an Institute of Electromechanical Information Technology, Xi'an 710065, China

Received date: 2012-12-25

  Online published: 2025-05-26

Fold

Abstract

In view of coupling influence of target-measurement error and correcting threshold on anti-radiation terminal course correction submunition system precision, the target-measurement model of radiation sourse was established on base of the six-degree rigid exterior ballistic trajectory model and the working principle. To solve this problem, a method of optimization of angular deviation parameter projectiles declination and azimuth simulation analysis optimization based on Monte-Carlo simulation method was put forward and the CEP curve under the conditions of different correction threshold and target measurement errors by simulation was obtained. Considering the allowable error of target-measurement under the system requirement, the study gives the measurement error and the corresponding threshold which provides a basis for system design.

Key words： parameter optimization; objective measurement; correction threshold; Monte-Carlo method

Cite this article

YANG Huijuan , QU Xiqiang , HUANG Zheng , WANG Jiawei . Optimization for Trajectory Correction Accuracy of Target Measurement Based on Monte-Carlo[J]. Journal of Projectiles, Rockets, Missiles and Guidance, 2013 , 33(4) : 134 -137 . DOI: 10.15892/j.cnki.djzdxb.2013.04.046

[an error occurred while processing this directive]

References

[1]
姚文进, 王晓鸣, 高旭东,等. 弹道修正弹脉冲修正机构简易控制方法[J]. 弹道学报, 2007, 19 (3): 19- 22.
[2]
Vincent T L, Cottrell R G, Morgan R W. Minimizing maneuver advantage requirements for a hit-to-kill interceptor[J]. Journal of Aerospace Engineering, 2005, 219 (2): 113-129.
[3]
Subchan S. Minimum-time optimal trajectories for the terminal bunt manoeuvre, AIAA 2005-5968 [R].2005.
[4]
王佳伟, 霍鹏飞, 陈超. 基于蒙特-卡洛法的冲推器数量与冲量优化[J]. 探测与控制学报, 2010, 32 (1): 92-97.
[5]
霍鹏飞. 反辐射末修子弹精度仿真分析[R].中国兵器工业集团第212 研究所.
[6]
徐明友. 高等外弹道学[M].北京:高等教育出版社,2003.
Options
Outlines

/

〈 〉

[an error occurred while processing this directive]