[an error occurred while processing this directive] [an error occurred while processing this directive] [an error occurred while processing this directive]
[an error occurred while processing this directive]

Effect of Unsteady Temperature Field on Performance of Long Fiber Coil at Startup

  • WANG Xiaozhang ,
  • JIANG Junbiao ,
  • NIU Zhen ,
  • ZHANG Tianyao ,
  • LI Xiao ,
  • LIANG Mingshan ,
  • TAN Pengli
Expand
  • Xi’an Modern Control Technology Research Institute, Xi’an 710065, China

Received date: 2021-09-18

  Online published: 2025-02-03

Abstract

For the effect of unsteady temperature field on the performance of fiber coil during the startup process of fiber optic gyroscope inertial navigation device, the thermal drift error model based on the quadrupole winding is established in this paper. The influence of Shupe effect and thermal stress in the slowly varying temperature field is analyzed theoretically. The relationship between the number of turns per layer and the thermal stress in the fiber coil is discussed. A simple and efficient experimental method for temperature performance evaluation of fiber coil is proposed. The experimental results show that this method has a good accuracy.

Cite this article

WANG Xiaozhang , JIANG Junbiao , NIU Zhen , ZHANG Tianyao , LI Xiao , LIANG Mingshan , TAN Pengli . Effect of Unsteady Temperature Field on Performance of Long Fiber Coil at Startup[J]. Journal of Projectiles, Rockets, Missiles and Guidance, 2022 , 42(3) : 32 -36 . DOI: 10.15892/j.cnki.djzdxb.2022.03.007

[an error occurred while processing this directive]
[1]
LI Y, HUANG X, LU B B, et al. Research on the suppression method of temperature transience effect error of fiber optic gyroscope[J]. Piezoelectrics & Acoustooptics, 2020, 42(5): 649-654.

[2]
DENG Y Q, WANG J C, HAO Z J, et al. Compensation method for FOG startup drift[J]. Transducer and Microsystem Technologies, 2020, 39(12): 61-64.

[3]
CUI J R, WU W Q, HE X F. FOG offset thermal drift coefficient piecewise estimation based on angular increments and vector norm value observation[J]. Navigation and Control, 2020, 19(6): 74-82.

[4]
ZHANG Z, YU F. Quantitative analysis for the effect of the thermal physical property parameter of adhesive on the thermal performance of thequadrupolar fiber coil[J]. Optics Express, 2017, 25(24): 30513-30525.

[5]
WANG X Q, ZHANG T, LIANG L J, et al. Testing technique of distributed polarization coupling in fiber coil and the beat length of used fiber[J]. Laser & Optoelectronics Progress, 2020, 57(23): 230602.

[6]
LIU Y Y, LI J, WANG L C, et al. Evaluztion method of FOG fiber coil based on Shupe coefficient[J]. Navigation and Control, 2020, 19(6): 90-97.

[7]
LEFEVRE H C. The fiber-optic gyroscope[M]. London: Artech House, 2014.

[8]
GAO Z X, ZHANG Y G, WANG G C, et al. Analysis and simulation for the thermal performance of the octupolar fiber coil[J]. Optical Engineering, 2014, 53(1): 016114.

[9]
ZHANG Z, YU F, SUN Q. Thermal-induced rate error of a fiber-optic gyroscope considering various defined factors[J]. Optical Engineering, 2017, 56(9): 097103.

[10]
LI X Y, LING W W, WEI Y H, et al. Three-dimensional model of thermal-induced optical phase shifts in rotation sensing[J]. Chinese Optics Letters, 2015, 13(9): 090603.

[11]
WANG X Z, JIANG J B, LI Y, et al. Effect of shock on Sagnac fiber interferometer performance[J]. Chinese Journal of Lasers, 2017, 44(7): 0706003.

[12]
ZHUO C, DU J B. Shupe effect of fiber sensing coils in multidimensional thermal field[J]. Acta Physca Sinica, 2018, 67(1): 010701.

[13]
YANG S M, TAO W Q. Heat transfer[M]. 4th ed. Beijing: Higher Education Press, 2006: 133-134.

Outlines

/

[an error occurred while processing this directive]