/
| 〈 |
|
〉 |
Journal of Projectiles, Rockets, Missiles and Guidance >
Research of Impact on Micro Solid Rocket Motor Ignition Efficiency
Received date: 2015-03-17
Online published: 2025-05-28
Focused on ignition delay or ignition failure in micro solid rocket motors, ignition theoretical analysis and experimental research were finished and an improved formula was put forward. The research shows that ignition efficiency of micro solid rocket motors is lower than that of routine-scale motors apparently; it means that ignition efficiency must be considered when calculating the mass of ignition charge by general formula. In addition, the structure of annular tablet is better than the structure of medicine for the same ignition dose.
ZHANG Ming , TU Sihua , XING Yixing , HUANG Qiang , ZHANG Qiufang , WU Qiu . Research of Impact on Micro Solid Rocket Motor Ignition Efficiency[J]. Journal of Projectiles, Rockets, Missiles and Guidance, 2015 , 35(5) : 92 -94 . DOI: 10.15892/j.cnki.djzdxb.2015.05.023
| [1] | 陈汝训, 刘铭初, 李志明, 等. 固体火箭发动机设计与研究(下)[M]. 北京: 中国宇航出版社, 2009: 402-438. |
| [2] | 樊建龙, 唐金兰, 李进贤, 等. 固体火箭发动机点火瞬间火焰传播模型比较研究[J]. 固体火箭技术, 2008, 31 (6): 575-582. |
| [3] | 陈军涛, 蹇泽群, 陈林泉. 固体火箭发动机点火瞬时内流场轴对称数值分析[J]. 固体火箭技术, 2004, 27 (3): 173-176. |
| [4] | 余贞勇. 翼柱型装药发动机点火升压过程计算[J]. 固体火箭技术, 2000, 23 (3): 1-6. |
| [5] | 张秋芳, 李越森, 胡乃合. 边界条件对尾部点火性能的影响[J]. 火炸药学报, 2002 (2): 50-51. |
| [6] | 张秋芳, 王子庚, 余秀华. 某自由满装填固体发动机低温点火失效的解决措施[J]. 火工品, 2008 (6): 39-41. |
| [7] | 张秋芳, 王宁飞, 田维平. 小型固体火箭发动机尾部点火设计与实验[J]. 火炸药学报, 2006, 29 (2): 51-54. |
/
| 〈 |
|
〉 |